hello all,
I've been trying for sometime now trying to connect to our novell server and
do some real IPX stuff.
I've read through the docs many time but so far to no avail.
I'm running redhat 7.3
I have dosemu-1.1.3.tgz
I have dosemu-freedos-bin.tgz i installed systemwide
I'm using a Kingston pci nic card for IPX
I have ipx configured and slist show the server LEARNSERV
I have ipx_support = (on) in dosemu.conf
I load lsl.....no problem
I load netx....it says that it cannot find the server
I have 2 pci nic cards installed eth0 is for IPX stuff and eth1 is for
internet stuff.
My net.cfg file has...
REM ****************************************************************
REM The following section was added 05-23-2002 16:12:11
REM Added by QStart for KNE100TX PCI Fast Ethernet Adapters Version 7.2
REM Copyright (c) 1999, Kingston Technology Company
REM ****************************************************************
LINK SUPPORT
Buffers 8 1514
Preferred server LEARNSERV
;Link Driver KTC100
; Frame ETHERNET_802.3
; Frame ETHERNET_II
; ***********************************************************
; The following item(s) which have a semicolon in front of
; the line will not execute. In certain situations you may
; want to include them by removing the leading semicolon.
; ***********************************************************
; You may need to add the following items if you are using multiple
; PCI adapters:
;Slot 1
;This forces the above driver to search
;for the first(1) board instance. This
;parameter is used if you have multiple
;network adapters.
; This section would be for your second adapter:
;Link Driver xxx
;Substitute your driver for xxx
;This driver needs to be loaded in you AUTOEXEC.BAT
;or STARTNET.BAT file. If this is the same driver
;as the one used above, you must load it twice.
;Frame yyy
;Substitute your frame type for yyy
;Slot 2
;This forces the xxx driver to search
;for the second(2) board instance.
; End section for multiple adapters.
; ***********************************************************
; The following item(s) which have a semicolon in front of
; the line will not execute. In certain situations you may
; want to include them by removing the leading semicolon.
; ***********************************************************
;Netware DOS Requester
;PB Buffers = 0
;Disables Packet Burst on workstation.
;In certain situations this may use
;less memory.
;Show Dots = ON
;Under Windows this allows you to see
;the parent directory. (Defaults to OFF)
;Large Internet Packets = OFF
;Defaults to ON which improves performance.
;You must turn this off if any router on
;your network is not capable of routing
;packets larger than 512 bytes.
; ***********************************************************
; The following item(s) which have a semicolon in front of
; the line will not execute. In certain situations you may
; want to include them by removing the leading semicolon.
; ***********************************************************
;SPX CONNECTIONS = 64
;This parameter is needed if you configure
;this workstation as a remote print server.
REM ****************************************************************
REM End section added by QStart 05-23-2002 16:12:11
REM ****************************************************************
Everthing works fine under ms-dos
I'm trying to build a server for multiple access via ssh to the novell
server
Any help would be greatly appreciated
I would even pay for support as this is very important to our users
Thank in Adv.
J. Scott Andreas :)
IS/Programmer/WebDevelopement
Learning Services, Inc.
e-mail: [EMAIL PROTECTED]
phone: 1-800-877-9378 ext. 146
fax: (541) 744-2056
--- __o
--- _-\<,_
--- (_)/ (_)
-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
