>
>
> Jens Strohschnitter wrote:
>
> >Hi list,
> >
> >I have problems while using lprng with dosemu 1.3.1.
> >In my printcap I have added the following lines:
> >
> >pr-fra19|remote printer on pr-fra19:\
> > :sd=/var/spool/lpd/pr-fra19:\
> > :rm=pr-fra19:\
> > :rp=text:\
> > :bk:sh:mx#0:
> >
> >The dosemu.conf looks like:
> >
> >$_printer = "pr-fra19"
> >$_printer_command = "lpr"
> >
> >But when I try to print from a application running underdosemu, nothing
> >happens.
> >So I have started the dosemu with a logfile (dosemu.bin +D-a+w+p -o
> >/tmp/dos.log) and found following lines:
> >
> >LPT: initializing printer <<NODEV>>
> >LPT: initializing printer <<NODEV>>
> >LPT: initializing printer <<NODEV>>
> >LPT: print to non-defined printer LPT3
> >LPT: print to non-defined printer LPT2
> >LPT: init printer 0
> >
> >The printer is plugged on a printbox, that is connected via ethernet with
> >the LAN
> >A testprint from linux (lpr -Ppr-fra19 /etc/xxx) works fine.
> >
> >Hope someone can help me to fix this problem. A running dosemu (1.1.3-5)
> >works fine under SuSE 7.2 / 2.4.16. But
> >now we have to use SLES9 from SuSE with Kernel 2.6.5-XXX.
>
> lpr command should be "lpr -l" if you are using cups
Hi out there,
no, I am using lprng in Version 3.9.x.
I have tried out lpr -l but nothing happens.
Are the entries in the debuglog (LPT: initializing printer <<NODEV>>) ok ?
--
Regards,
Jens Strohschnitter
-------------------------------------
*!!!LINUX LINUX LINUX LINUX LINUX!!!*
* http://www.jens-strohschnitter.de *
-------------------------------------
Set the controls for
the heart of the sun
-------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
