On Mon, 23 Nov 1998, Radim HABALA wrote:
> Hi,
> I have two questions about IOmega's hardware:
> a) Iomega ditto 2GB external (parallel) tape device - how to configure it
> to work?
> b) Iomega ZIP 100 MB IDE - Linux founds it as ATAPI device, than keeps it
> as ATAPI CD ROM, but msdosfs media connot be mounted hede (I have no other
> formats (except Win95) to try.
>
> Any ideas? Does an newer kernel supports some of that devices? (I have
> used 2.0.0 Slackware '95 IDE bootdisk, i didn't found anything in kernel
> 2.0.33 configuration anything ..)..
>
> Any ideas?
ad b) internal IDE iomega zip 100 is supported by 2.0.35, but as atapi ide
floppy, not as cdrom. Compile your kernel kernel with ide floppy support
and you'll probably will have to run /usr/src/linux/scripts/MAKEDEV.ide
to create correct nodes in /dev/. If your zip drive is e.g. /dev/hdc,
mount device /dev/hdc4 to do the work. I'm using fat and vfat zip disk and
it works fine.
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
