I am having a really wierd problem here. Here is the routing table from my Linux
2.1.123 router:
27.19.254.224 27.19.254.40 255.255.255.252 UG 0 0 0 eth1
27.19.254.228 27.19.254.37 255.255.255.252 UG 0 0 0 eth1
27.19.254.232 27.19.254.43 255.255.255.252 UG 0 0 0 eth1
27.19.254.192 27.19.254.31 255.255.255.224 UG 0 0 0 eth1
27.19.254.64 27.19.254.32 255.255.255.192 UG 0 0 0 eth1
27.19.254.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 10.1.1.9 0.0.0.0 UG 0 0 0 eth0
This is the problem. A host was connected to the ethernet and assigned 27.19.254.47.
This works for about 45 minutes or so. When it stops working, I can still ping that
address from this router
but not from a machine outside of this network. However, the outside machine can
still ping
other hosts on that network, ie 27.19.254.41 is still reachable from the outside.
I've tried deleting
the arp cache on this router but that does not fix the problem. The only way to fix
the problem
seems to be to reboot either the client machine or the router, and then the fix only
lasts about 45 minutes. Any ideas would be highly appreciated.
TIA,
Tim
----------------------------------------------------
Timothy M. Wolfe | Why surf when you can Sail?
[EMAIL PROTECTED] | Join Oregon's Premier
Sr. Network Engineer | Wireless Internet Provider!
ClipperNet Corporation | http://www.clipper.net/
----------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
