This worked great!
Many thanks from slightly flooded Victoria (Way south)Tx.
Phil Z.
Vladimir V. Ivanov wrote:
>
> >
> > Is it possible to have multiple shape devices with 2.1.125 (i.e. shaper0
> > shaper1, shaper2 etc.)? I have shaping installed and working but I cant
> > seem to get any more than 1 device to shape. When I try to attach a
> > second shaper to another ethernet card it returns "No such device" but
> > the card does exist and is listed by ifconfig. When I tried to re-insert
> > the module the system reports back that the module is already loaded.
> > Any tips would be appreciated.
> >
> > Thanks
> >
> > Phil Z.
> > -
>
> You may do it with symbolic links :
>
> elis# ln -s shaper.o shaper1.o
> elis# ln -s shaper.o shaper2.o
>
> elis# modprobe shaper
> elis# modprobe shaper1
> elis# modprobe shaper2
>
> The commands listed above will allow you to have a three shaper
> modules loaded.
>
> P.S. It's not tested by me, but this method works for dummy driver.
>
> ---
> Best regards, Vladimir Ivanov
> E-mail: mailto:[EMAIL PROTECTED]
> World Wide Web: http://elis.tusur.ru/~vlad
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
