On Mon, 15 Mar 1999, Dwight Rhodes wrote:
> Having trouble with NE2000 clone (SN2000CT, ISA) - have used
> linuxconf to set eth0 and eth1 to all the i/o addresses specified in the
> card's documentation, with no results. Have tried some of the IRQs with
> different i/o combinations - Anyone know the most likely settings to
> work, or am I missing some other steps?
> **********************************************************************
try:
append="ether=10,0xff80,eth0 ether=9,0xff40,eth1 ether=5,0xff20,eth2"
in your lilo.conf
***************************************************************************
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to [EMAIL PROTECTED]
>
[31m Indifference will certainly be the downfall of mankind,but who cares??
4m
[4m [36m Siddhartha Srivastava
[36m dept. of Electrical Engineering,
[32m Indian Institute Of Science,
[33m Bangalore.
3 Hostel Addr.
3 M-50. [0m
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
