Hi,
I know this is not the right place..I am not sure which mailing list this
goes to..so..pls..
startx worked fine for me for a long time..till all of a sudden it breaks
with the following error..I can make no sense of it...Can someone help
pls..
Here is the output as shown:
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.34 i686 [ELF]
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
newmmio, mmio_928, s3_generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) S3: Graphics device ID: "My Video Card"
(**) S3: Monitor ID: "Dell VS17"
(--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3: Invalid vertical timing for mode "400x300". Deleted.
Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) S3: PCI: Trio64V2 rev 16, Linear FB @ 0xf8000000
(--) S3: chipset: Trio64V2/GX rev. 16
(--) S3: chipset driver: newmmio
(--) S3: card type: PCI
(--) S3: videoram: 2048k
(--) S3: Ramdac type: s3_trio64v2
(--) S3: Ramdac speed: 170 MHz
(--) S3: Using Trio64V2 programmable clock (MCLK 54.886 MHz)
(--) S3: Maximum allowed dot-clock: 170.000 MHz
(**) S3: Mode "1024x768": mode clock = 75.000
(**) S3: Using 16 bpp. Color weight: 565
(**) S3: Virtual resolution set to 1024x768
(--) S3: Local bus LAW is 0xF8000000
(--) S3: Using a banksize of 2048k, line width of 1024
(--) S3: Using a single 64x64 area at (960,769) for expanding pixmaps
(--) S3: Using 16 planes of 960x255 at (0,769) aligned 8 as font cache
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
waiting for X server to shut down xinit: unexpected signal 1
Thanks,
Arni
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
