Hi everyone !
I've a problem i find really strange .... here's the description:
I have a PC acting as a router with 3 ethernet interfaces,
one is PCI and is eth0 (tulip.o driver)
two are ISA and are eth1 and eth2 correctly assigned regarding their io/irq
(ne.o driver for both)
I'm using Linux redhat 5.2, with kernel 2.2.3, with all necessary packages
for kernel 2.2.x
I have the 3 correct files ifcfg-eth0, ifcfg-eth1 and ifcfg-eth2 in
/etc/sysconfig/network-scripts/
the drivers are compiled in modules and loaded using kmod feature.
OK, now for the problem :
When booting, the 3 cards are detected, but when i log on and do an
ifconfig,
it reports than eth0 is correctly configured with values of ifcfg-eth0,
eth1 is configured with values of ifcfg-eth2 (aie :) )
eth2 is not configured at all and thus not displayed.
So, what's wrong ?? i've spent 2 days 'hacking' the rc.*, tried to add some
delay between detection/ifconfig
and nothing worked...
For now, I'm asking the Gods :)
Any suggestion ??
Thanks in advance,
Seb. W.
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
