Hi.. I ve read the docs on how to receive incoming calls into my Linux box( just want to be reassured ). Seems that I can set up Uugetty,mingetty or mgetty to do that. So I went downloadin following mgetty package: mgetty-1.1.9-4.i386.rpm and did an rpm -ivh of it. But it gave erroe: "/bin/ksh is needed by mgetty-1.1.9-4. I) So here 's my first question: I know "ksh" is some kind of shell. But how to get it?? What package to I need to download in order to get it?? II) Say I dont install mgetty. I guess that 's not a problem considering the fact that I have a /sbin/mingetty file on my linux box. which means that I can use mingetty instead of mgetty right??? II) I ve read that I would have to add in /etc/innitab a line like :" S1:234:respawn:/sbin/uugetty ttyS3 F38400 vt 100".. So, in my case (because I have mingetty), it should be: S1:234:respawn:/sbin/mingetty ttyS3 F38400 vt 100".. Is that right???? III) Someone who had mgetty had somethin like: m1:3:respawn:/usr/sbin/mgetty -D -x2 /dev/ttyS3 ..... The -D -x2 seemed to be important, but should I use them only if i was usin mgetty, or can I have somethin like: m1:3:respawn:/usr/sbin/mingetty -D -x2 /dev/ttyS3 IV) A last one: When someone ask me to compile mgetty or mingetty to work on my machine, I guess that just mean to install the packages, exple rpm -ivh mgetty-1.1.9-4.i386.rpm. I was a bit confused, cause I was serching everywhere during the recompilation of my kernel if there's an option for that.. ?? Thamks for time and consideration Eric Jamerson International Center for Technological Studies Edmon, ALB - To unsubscribe from this list: send the line "unsubscribe linux-net" in the body of a message to [EMAIL PROTECTED]
