Donald Becker wrote:
> There were several versions of the D-Link 21140 board that had horrible
> transceiver wiring bugs. For instance the C3 revision was a 10/100 board
> that powered up at 10mbps only. (A 10/100 board should power up
> NWay-advertising all of it capabilities.)
Maybe that's one of mine :(
Ups... my router has two DFE-500TX one atached to Fore 10BT Switch and
another
to a 100BTX Dlink Switch, sometimes the cards just torn to slow, a ping
to and
adjacent machine takes 1000 ms !
If I make an ifconfig eth* down, and then up, everything works fine by a
couple of
days. I have found that both tulip and de4x5 works, but, wich one is
better ?
Seems that tulip have better multicast support, and NIC to NIC copy.
At another net, guys have the same conf that mine
i.e a PC with two DFE 500TX and have the same problems.
These two routers have pretty good net load.
Any suggestions ?
------------------------------------------------------------------
Juan Jose Sierralta P. | [EMAIL PROTECTED]
Ayudante de Proyecto Fondef III | Fono: +56-32-654093
Departamento de Electronica. | "In a world without fences
UTFSM. | who need Gates ?"
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
