MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Hi all I have a SUSE linux box running 2.2.6 with ipchains/MASQ running. I have within /etc/rc.config in the Firewall & Masqeurading sections the proper items (all are not included below) FW_START="yes" FW_LOCALNETS="192.168.0.0/24 24.112.x.x " FW_INT_DEV="eth1" FW_WORLD_DEV="eth0" FW_ROUTER="" FW_FRIENDS="yes" FW_INOUT="yes" MSQ_START="yes" MSQ_NETWORKS="192.168.0.0/24" MSQ_DEV="eth0" MSQ_MODULES="ip_masq_cuseeme ip_masq_ftp etc" ****************************************************** and /etc/fw-friends contains the said reserved class C clients: 192.168.0.1 192.168.0.2 192.168.0.3 /sbin/init.d/masquerade status returns: IP masquerading entries ipchains -L returns: Chain input (policy ACCEPT): Chain forward (policy ACCEPT): target prot opt source destination ports user_msq all --- 192.168.0.0/24 anywhere n/a Chain output (policy ACCEPT): Chain user_msq (1 references): target prot opt source destination ports MASQ all ------ anywhere anywhere n/a ******************************************************* On internal network with Linux box with two NICs that show via ifconfig: lo Link encap:Local Loopback inet addr:127.0.0.1 Bcast:0.0.0.0 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:8040 errors:65 dropped:0 overruns:0 TX packets:0 errors:0 dropped:0 overruns:8040 dummy Link encap:10Mbps Ethernet HWaddr 00:00:00:00:00:00 inet addr:24.112.x.x Bcast:24.112.43.255 Mask:255.255.252.0 UP BROADCAST RUNNING NOARP MTU:1500 Metric: RX packets:0 errors:0 dropped:0 overruns:0 TX packets:0 errors:0 dropped:0 overruns:0 eth0 Link encap:10Mbps Ethernet HWaddr 00:80:C8:E6:52:59 inet addr:24.112.x.x Bcast:24.112.43.255 Mask:255.255.252.0 00:80:C8:E6:52:59 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:22484 dropped:0 overruns:0 TX packets:4 errors:0 dropped:0 overruns:55550 Interrupt:9 Base address:0xd000 eth1 Link encap:10Mbps Ethernet HWaddr 00:80:C8:E6:38:70 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 TX packets:0 errors:0 dropped:0 overruns:540 Interrupt:3 Base address:0xb800 ******************************************************* Finally route -n returns: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 24.112.x.x 0.0.0.0 255.255.255.255 UH 0 0 0 dummy 192.168.0.0 " " 255.255.255.0 U 0 0 0 eth1 24.112.x.0 " " 255.255.252.0 U 0 0 0 eth0 24.112.x.0 " " " " " " U 0 0 0 dummy 24.112.x.0 " " " " " " U 0 0 0 eth0 127.0.0.1 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 24.112.x.1 0.0.0.0 UG 0 0 0 eth0 I cant see why one cannot ping an internal client (e.g. win95 with TCP IP set as 192.168.0.2/255.255.255.0 and gateway as 192.168.0.0/192.168.0.1 or gateways set singularly), or ping from client to linux box. This on on baseT ethernet and hub/cables work under NT. Any recommendations and/or ideas as to what is causing this problem would be greatly appreciated. Thanx for your time Mac [EMAIL PROTECTED] _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com - To unsubscribe from this list: send the line "unsubscribe linux-net" in the body of a message to [EMAIL PROTECTED]
