On Fri, 14 May 1999, Bob Cadenza wrote:
> I am having problems getting my PCMCIA network card to work. But it
> isn't the PCMCIA system. All indications are that the cardmgr is
> working perfect. I am running RH 6.0 and when it boots up and runs the
> networking script, it says bringing up eth0, then delaying eth0, then
> failed. I don't really understand what to do, and it could be that the
> networking script just doesn't handle PCMCIa very well, So can anyone
> help me get this eth0 working. Like what to add change, and so on.
> Well let me know.
What kind of card are you using? What kind of laptop? And can you
include the relevant messages from /var/log/messages so we can see what's
happening? I just went through this myself and got everything working
fine. I had to tell the PCMCIA drivers not to assign IRQ5, which was used
by my laptop's internal sound hardware. I also had to massage the
/etc/pcmcia/config file a little to get it to properly recognize a couple
of my el cheapo cards.
Dale
---
The most exciting phrase to hear in science, the one that heralds new
discoveries, is not "Eureka!" (I found it!) but "That's funny ..."
-- Isaac Asimov
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
