Hi,

  Upgraded this machine from 2.0.36 yesterday... didn't take too long...  
Think i'll try the 0.99B driver. The machine has relatively high UDP
traffic and CPU load. 100 Mbit/s, full-duplex.

Jul  9 14:32:04 host kernel: eth0: Transmit timed out: status 7048  0000 at 
9685638/9685653 command 000ca000.
Jul  9 14:32:04 host kernel: eth0: Trying to restart the transmitter...
Jul  9 14:32:09 host kernel: eth0: Transmit timed out: status 7048  0000 at 
9685638/9685653 command 000ca000.
Jul  9 14:32:09 host kernel: eth0: Trying to restart the transmitter...
Jul  9 14:32:14 host kernel: eth0: Transmit timed out: status 7048  0000 at 
9685638/9685653 command 000ca000.
Jul  9 14:32:14 host kernel: eth0: Trying to restart the transmitter...

Linux version 2.2.10 (root@  ) (gcc version 2.7.2.3) #3 SMP Thu Jul 8 17:40:51 EEST 
1999
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID: GVC      Product ID: 440BX        APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2

3c59x.c:v0.99H 11/17/98 Donald Becker 
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: Intel EtherExpress Pro 10/100 at 0xdd80, 00:90:27:35:BB:AD, IRQ 19.
  Board assembly 689661-004, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x24c9f043).
  Receiver lock-up workaround activated.

  - Hessu


-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]

Reply via email to