Hi,
On Tue, 20 Jul 1999, hans schneidhofer wrote:
> hi
>
> have a 3C905 TX Ethercard. Trying a "modprobe 3c59x" results
> in a "invalid parameter irq"
Sure you have no irq options in /etc/conf.modules ?
> Doing a "modprobe 3c59x irq=10" gives the same behavior.
and insmod 3c59x ?
>
> That's the faq's what I have on my system :
> on the motherboard I tried to adjust PCI-Slot 2 is Auto and
> also tried IRQ=10. Both have the same result.
As far i know PCI bus is autodetect, and no irq parameter should be
required.
>
> doing a "cat /proc/pci" I see the 3C905 TX on PCI-Slot 2
> and IRQ=10.
>
> Would need your help very urgently.
> Thans in advance
>
> hans schneidhofer
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to [EMAIL PROTECTED]
>
I use some 905's here without problems with 2.2.xx and 2.3.xx, i suggest
dropping the irq parameter.
Arjan Filius
mailto:[EMAIL PROTECTED]
--------------------------------------------------------------
Argh! All right, so how am I supposed to work with Linux when
everything's already been done?! Can't these people leave some
broken MSDOS like parts so there's problems left to solve!?....
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
