Hello knowledgeable ones, quick question, just installed a couple linux boxes with 3com 3c905b TX NIC's it is a 10/100 card and they are plugged into a 10/100 hub there are other machines that register the green light for 100Mbit, but these boxes are still on the yellow light for 10Mbit to the best of my knowledge the card should autonegotiate the speed and there are no jumpers or anything on the card conf.modules: alias eth0 3c59x got this from the dmesg: 3c59x.c:v0.99E 5/12/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html eth0: 3Com 3c905B Cyclone 100baseTx at 0xb000, 00:50:04:d3:6a:42, IRQ 11 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/NWay Autonegotiation interface. Enabling bus-master transmits and whole-frame receives. other than not registering 100Mbit all networking is fine. aj - To unsubscribe from this list: send the line "unsubscribe linux-net" in the body of a message to [EMAIL PROTECTED]
