I have 2 dsl lines, and would like to have multihomed servers
some of my machines have 2 nic cards in them, and I have been
able to access them by telnetting to either ip. traceroutes show that
I am one hop away from other machines on either network. however
I am having lots of odd problems
some machines cannot be access from the outside. one machine went
down on one line and immediately went up on the other. lots of packet loss
and stuff like that
what should my rc.inet1 file look like (slackware)?
how should my hardware be set up? see attached bitmap for my
current setup
here is some info from one of my machines. it works fine if I just set it up
on
one isp or the other.
Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt
Iface
216.46.85.16 * 255.255.255.240 U 1500 0 0 eth0
216.32.200.0 * 255.255.255.0 U 1500 0 0 eth1
loopback * 255.0.0.0 U 3584 0 0 lo
default 216.32.200.1 0.0.0.0 UG 1500 0 0 eth1
default 216.46.85.17 0.0.0.0 UG 1500 0 0 eth0
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:65381538 errors:0 dropped:0 overruns:0 frame:0
TX packets:65381538 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
eth0 Link encap:Ethernet HWaddr 00:A0:CC:51:BE:DE
inet addr:216.46.85.20 Bcast:216.46.85.31 Mask:255.255.255.240
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2111377 errors:0 dropped:0 overruns:0 frame:0
TX packets:74813 errors:0 dropped:0 overruns:0 carrier:0
Collisions:114
Interrupt:11 Base address:0xdc00
eth1 Link encap:Ethernet HWaddr 00:40:05:42:CF:49
inet addr:216.32.200.14 Bcast:216.32.200.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1711303 errors:0 dropped:0 overruns:0 frame:0
TX packets:4178344 errors:0 dropped:0 overruns:0 carrier:0
Collisions:88320
Interrupt:10 Base address:0xd880
<<setup.bmp>>
setup.bmp
setup.bmp