On Thu, 14 Oct 1999, Alex Pope wrote:
> hi all,
> here's what i do (from /etc/rc.d/rc.inet1) :
>
> ifconfig lo blah blah blah
>
> ifconfig eth0 blah blah blah
> shapecfg attach shaper0 eth0
> shapecfg speed shaper0 9600
> route add -net blah blah blah shaper0
>
> ifconfig eth1 blah blah blah
>
> ifconfig eth2 blah blah blah - so far so good. and now
> shapecfg attach shaper1 eth2 - the result is
>
> shaper: no such device
>
> i load the shaper module in rc.S :
> insmod shaper
> Traffic Shaper 0.05 for Linux 2.0 <[EMAIL PROTECTED]>
> Traffic shaper initialised.
>
> i use slackware based linux with kernel 2.0.36, modules 2.0.0.
> the ethernets:
> eth0: PCI NE2000 found at 0xd400, irq 9, 00:60:52:08:36:61
> eth1: DE450-CA at 0xd000 (PCI bus 0, device 11), h/w address
> 00:00:f8:30:cd:b3, and requires irq 5 (provided by PCI BIOS)
> eth2: 3c509 at 0x300 tag 1, BNC port, address 00 a0 24 05 73 fa, irq 10
>
> my guess is that the device shaper1 was not registered during module
> init... or the idea is to register the device at some later time, through
> the action of shapecfg program ?
>
insmod -o shaper1 shaper
insmod -o shaper2 shaper
...
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
