xu wrote:
>
> Hi, everyone:
> I use RedHat 6.0 with one network adapter.
> It works normally.
> But the routing table has two same entries
> of default routing after boot up.
> Like:
> 0.0.0.0 210.71.98.30 0.0.0.0 UG 0 0 0
> eth0
> 0.0.0.0 210.71.98.30 0.0.0.0 UG 0 0 0
> eth0
> Why?
> Thanks in advance.
> Xu lihua
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to [EMAIL PROTECTED]
You used two different netconfigs. Something like netcfg and then
linuxconf
they both right to different config files, but if they both exist the
startup
will read them both. The ip's and such are just reset but the route
gets added
twice. Best bet is remove anything to do with linuxconf, It is a great
idea but
and is good for a new users but is nowhere near ready to use for a
production system.
--
Jeff Largent ImageLinks, Inc.
System Admin Melbourne, Fl 32935
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
