> "tr0: initial interrupt: shared RAM located at
> 000D02CC" (it is one line)
^^^^^^^^^^^^^^
Definately not correct, shared ram should be located on a boundary the same size as
the shared ram on the card, i.e. a 16K boundary for a 16K shared ram size.
> "tr0: unrecoverable error: Error code 0011"
The card has managed to completely confuse itself by this point.
Two things to do, initially run lanaid from a dos boot disk and make sure the card is
running in Auto mode not Turbo mode (i.e. ioport 0xA20 or 0xA24) and then specfically
pass the card the io / irq to the card with insmod
Mike
Linux Token Ring Project
http://www.linuxtr.net
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
