Have you tried ne.o with these conf.modules options
alias eth1 ne
options ne io=0xaaa irq=yy
(probably aaa = 300 and yy = 10 or 11 by default)
Depending on your BIOS's PNP support, you might need to run their dos
utility to set the i/o and IRQ. You can download the AE200PNP.ZIP file from
the addtron site, and then if possible, run the autoinst.exe or pnpsetup.exe
files from a dos prompt if you can get to one.
I don't know if there's a native linux config utility for these ISA NIC
cards such as the autoinst.exe for the addtron, or the similar setup.exe
program for the Linksys ISA 10 Ether16Combo NIC.
Ted
www.linux-driver.com
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> CableBG_Customer_support
> Sent: Sunday, January 16, 2000 12:33 AM
> To: [EMAIL PROTECTED]
> Subject: Addtron 1.0.10
>
>
> Hi,
> Do you know what is the linux driver for this card:
> AE-200PNP Ethernet Adapter
> Addtron 1.0.10 (ISA)
> http://www.cablebg.net
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
