I have a 3c509 card installed in a 486. I have two ip addresses set up, the one for this pc is 192.168.1.10 & the other which is a nt box is .11. When I ping from the 486 it says it gets a response from either IP address, but the netgear hub says no info is being sent. When I ping from the NT box to the Linux box I get no response, but the hub shows it is trying. The 3c509 only has a solid green light on the back of it. I am running RH 6.0. Thanks for any help. p.s. I am not running X at all. _______________________________________________________ Get 100% FREE Internet Access powered by Excite Visit http://freeworld.excite.com - To unsubscribe from this list: send the line "unsubscribe linux-net" in the body of a message to [EMAIL PROTECTED]
