HI ,
everybody
i have one problem, we want to setup proxy server using RH6.0 , after
installation , its giving error as follows:
----------------------------------------------------------------------
hda: Status timeout: status=0xd0 {Busy}
hda: no DRQ after issuing WRITE
ide0:reset;SUCCESS.
----------------------------------------------------------------------
this is b'cos we are using 8.4 Gb harddisk , so we reinstall on 4.3Gb
its working . Unfortunetly we have to use 8.4Gb harddisk ,so i want change
ide.c file ,i opened
/usr/src/linux/block/ide.h
i saw " WAIT_DRQ = 50 msec ------(line no: 160)
then i opened ../block/ide_disk.c
i saw " printk( KERN_ERR "%s: no DRQ after issuing %s\n",drive->name,
drive->mult_count?"MULTWRITE";"WRITE");---(line no: 385)
so first and third line(above error) are in ide.c (printk).
so at present in RH6.0 is using WAIT_DRQ = 50sec. That means our "great
linux " ide driver is not supporting 8.4Gb harddisk.
ABOUT HARDDISK:
Seagate U4 MODEL ST38421A
------------------------------------------
| 16,368 - 16 HDS -63 SECT --CH816,498,944 |
------------------------------------------
motherboard: intel
BIOS Version - 4s4eb2x0.86a.0018.p11
Processor Type - Pentium(R) III
processor speed - 450 MHZ
cahe RAM - 512 kb
if any one knows what to do please inform me.
from
ome
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
