I have unfortunately observed the driver stopped today.
I especially do not understand what is disable_irq_nosync(dev->irq) for?
Another question is what happens when Rx interrupt is generated during the
time Tx disables interrupts. Rx interrupt status is not cleared then and
interrupts might be not generated (edge)?
Fri Mar 17 16:43:23 CET 2000
Linux version 2.2.15pre14 ([EMAIL PROTECTED]) (gcc version 2.95.2 20000220
(Debian GNU/Linux)) #1 SMP Sat Mar 11 15:27:28 CET 2000
eth0 Link encap:Ethernet HWaddr 00:60:97:5C:D6:71
inet addr:131.152.105.107 Bcast:131.152.105.255 Mask:255.255.255.0
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:17575408 errors:0 dropped:0 overruns:0 frame:0
TX packets:19995438 errors:2 dropped:0 overruns:0 carrier:9
collisions:2494188 txqueuelen:100
Interrupt:10 Base address:0x300
CPU0 CPU1
0: 25219020 26101895 IO-APIC-edge timer
1: 107360 104590 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
8: 1 0 IO-APIC-edge rtc
10: 13859814 14166101 IO-APIC-edge eth0
12: 1746353 1764115 IO-APIC-edge PS/2 Mouse
13: 1 0 XT-PIC fpu
14: 1679731 1718996 IO-APIC-edge ide0
19: 30049 29898 IO-APIC-level aic7xxx
NMI: 1
ERR: 0
Fri Mar 17 16:43:29 CET 2000
total: used: free: shared: buffers: cached:
Mem: 130813952 128155648 2658304 71643136 2682880 31252480
Swap: 207187968 123138048 84049920
MemTotal: 127748 kB
MemFree: 2596 kB
MemShared: 69964 kB
Buffers: 2620 kB
Cached: 30520 kB
SwapTotal: 202332 kB
SwapFree: 82080 kB
4:43pm up 5 days, 22:33, 20 users, load average: 1.40, 1.83, 1.85
CPU0 CPU1
0: 25219361 26102209 IO-APIC-edge timer
1: 107360 104590 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
8: 1 0 IO-APIC-edge rtc
10: 13859814 14166101 IO-APIC-edge eth0
12: 1746607 1764368 IO-APIC-edge PS/2 Mouse
13: 1 0 XT-PIC fpu
14: 1679803 1719043 IO-APIC-edge ide0
19: 30053 29901 IO-APIC-level aic7xxx
NMI: 1
ERR: 0
Best regards,
--
Tomasz Motylewski
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
