Hi Guys
I have an Intel Pro 100B ethernet card. The IP address for the card is
196.25.211.51 and defined as eth0
the command I used to bind the addresses to this card is as follows
ifconfig eth0 196.25.211.51 broadcast 196.25.211.63 netmask
196.25.211.48
if I wanted to bind another IP address to this card could I do something
like this
ifconfig eth0:1 196.25.211.59 broadcast 196.25.211.63 netmask
196.25.211.48
under solaris this is possible as the above example, I was just wondering
how i would do it, i need to do it on a linux production server so i need to
be sure of the command so as not to interfere with the rest of the ipdetail?
If the command is not correct, could someone please point me in the correct
direction. the NET3-HOWTO does not diverse on this type of thing, so any
info would be much appreciated
Thanx
Bruce
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
