Oh, I should mention something that might be important: I'm testing
kernel 2.2.14.
Regards,
Ivan
On Fri, 14 Apr 2000, Ivan Passos wrote:
>
> Hello,
>
> I'm trying to have TEQL working with the Cyclades-PC300 synchronous cards,
> but it just doesn't send data thru the second link. Maybe I'm missing some
> configuration step ... Please help me!! :)
>
> Ok, the test environment is as follows:
>
> 10.0.0.1 10.0.0.2
> |--- cpc0 ----------------|
> Server | | Router
> |--- cpc1 ----------------|
> ------- 20.0.0.1 20.0.0.2 --------
> | |
> | |
> eth0 110.0.0.1
> 100.0.0.1
>
> The router is a Cyclades-PR3000 and it does NOT have load balance
> enabled, just to make things simpler.
>
> I'm testing load balancing by checking only the packet _transmission_ in
> Linux, i.e. if Linux transmits packets to the same destination thru 2
> different links bonded by TEQL, then it works. Just nevermind the fact
> that in this environment Linux will receive all packets thru the first
> interface .... :)
>
> So, my steps to use TEQL to bond these two links are:
>
> # ifconfig cpc0 up
> # ifconfig cpc1 up
> # tc qdisc add dev cpc0 root teql0
> # tc qdisc add dev cpc1 root teql0
> # route add 110.0.0.1 gw 10.0.0.2 /* Just to have some way to test it */
>
> Ok, I then ping 110.0.0.1, and ... I see that all data goes thru cpc0
> (link 1).
>
> So, TEQL is not working in my environment. My question is: what did I do
> wrong?? Did I miss some configuration step??
>
> Your help will be highly appreciated.
>
> Regards,
> Ivan
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
