Debian 2.2 is up and running now and with all your help I think the settings
are correct. I can reboot and using dmesg | less see that eth0 is
configured to IRQ 10. This agrees with the netbios setup. I can ping to
the loopback and to the IP address, as well as to the host, (all on the same
computer) but not to the router (off in another part of the building,
provided by the ISP). However, the led for the nic card isn't blinking at
all during any of this. I am using the same RJ45 port for the Linux box as
I used for a Windows machine, and had no problem with networking Windows.
Also, I had Windows installed on this Linux box before, and the card worked
fine. I feel like the card is good, but am missing the boat somewhere.
Help!
Thanks.
Jake
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
