Hello Dennis , A simple one yes . But not optimal .
in /etc/lilo.conf
append="ether=0x'irq',0x'io-address',0,eth0
ether=0x'irq',0x'io-address',0x0,eth1"
Hth, JimL
On Wed, 19 Jul 2000, Dennis wrote:
> With an intel 810E MB with on onboard Intel Controller, using a 1 slot
> riser card with an eepro100 card in the slot, Linux detects the card in the
> pci slot as eth0 and the onboard LAN controller as eth1 (clearly not what
> you want).....other O/Ss properly detect the onboard controller first.
>
> Is there a simple solution to this problem? Is this the eepro driver or the
> OS that scans the wrong card first?
>
> Dennis
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to [EMAIL PROTECTED]
>
+----------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | 25416 22nd So | Give me Linux |
| [EMAIL PROTECTED] | DesMoines WA 98198 | only on AXP |
+----------------------------------------------------------------+
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
