Jeff Garzik wrote:
>
> Ben Greear wrote:
> >
> > I've been running 8-hour+ traffic runs on RTL-8139 10/100 ethernet cards connected
> > by a 10/100 etherswitch and linux-kernel 2.2.14 <-> 2.2.16. I'm using three cards
>in each
> > machine, one for mgt, and two others for data generation/testing.
> > I use the ip command to set up source-based routing policies to
> > direct the ethernet traffic out over the correct port.
>
> Does "ifconfig ethX down ; ifconfig ethX up" fix the problem?
>
> If so, it's probably a bug in the rtl8139 driver... Working on solving
> it, but it's not solved yet in any of the available drivers.
>
> Jeff
Yes (think I mentioned that..) But, seeing as how UDP was still working,
over the very same card, are you sure it's the card?
Is there any way in particular that I can see if I'm seeing the same
bug you're hunting? Anything I can do to help?
Ben
--
Ben Greear ([EMAIL PROTECTED]) http://www.candelatech.com
Author of ScryMUD: scry.wanfear.com 4444 (Released under GPL)
http://scry.wanfear.com http://scry.wanfear.com/~greear
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
