If you're using a Redhat based system, you can download the "pciutils" rpm (if it's not already installed), and use the setpci program to configure your pci devices. ITS MOHAMMAD HABIB <[EMAIL PROTECTED]> wrote: > Hi friends, > > I am using two net cards ( Intel Pro /100+ and 3COM 3C90x both PCI > cards). When linux is started both cards use IRQ 11 . When running > "Ifconfig " , only Intel card properties are shown on "eth0" . I can ping > Intel card IP address but not any computer on the network. > On the other hand I am unable to assign IP address to 3COM card. > > Your help is highly appreciated. > > Regads > > M.Habib > - > To unsubscribe from this list: send the line "unsubscribe linux-net" in > the body of a message to [EMAIL PROTECTED] ____________________________________________________________________ Get your own FREE, personal Netscape WebMail account today at http://webmail.netscape.com. - To unsubscribe from this list: send the line "unsubscribe linux-net" in the body of a message to [EMAIL PROTECTED]
