MR> Hi Matias.
MR>
MR> > PCMCIA=yes
MR> > PCIC=i82365
MR> > PCIC_OPTS="i365_base=0x03e0"
MR> > CORE_OPTS=
MR> [...]
MR>
MR> Hmm, does not look that good. Did you read "man i82365" already?
Yes, but it says nothing about the VIA VT83C469.
MR> If not, there are some parameters that could help if they would be
MR> changed.
MR> Did you find the name of your pcmcia bridge within the howto (in the
MR> "supported" section)?
The box reads:
DataChute, from Antec Inc. <www.antec-inc.com>
Compliat with PCMCIA 2.1, JEIDA 4.1 & IntelExCA 1.5
Supports most PC cards with or without CIS.
Supports DOS 5.0 or higher, Win 3.1, Win95/98.
This is what I found on the ISA card:
4 chips 9D36 HC244 (20 pins each)
4 capacitors
2 male sockets for the hoses that connect this ISA card to the
card drive (like a floppy drive)
There's only one visible chip on the Card drive:
1 big chip (aprox. 50 pins on each side -> aprox 200 pins) that
says VIA VT83C469 9945CD TAIWAN 00B00771
According to section 1.4. ("supported") of PCMCIA-HOWTO, VT83C469 is
supported. But it does not work. I tried same parameters (I/O) that
M$Win98 reports.
I can modprobe pcmcia_core, but modeprobe i82365 fails saying:
/lib/modules/2.2.14-5.0/pcmcia/i82365.o: init_module: Device or resource
busy
/lib/modules/2.2.14-5.0/pcmcia/i82365.o: insmod
/lib/modules/2.2.14-5.0/pcmcia/i82365.o failed
/lib/modules/2.2.14-5.0/pcmcia/i82365.o: insmod i82365 failed
Same thing happens when doing "./pcmcia start" at /etc/rc.d/init.d
Help please, can't stand any more these people saying "but in Windows it
works perfectly well". I don't want to go to prision for homicide.
Matias.
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
