Hi all,

I'm installing Debian Woody on a new computer. I did already installed Woody before with no problem, but now, I have problems configuring the network card ('till now, I had other network cards). As you could have guessed, it's a D-link DFE-530tx card. It seems none of the 'drivers' work for that card. I already checked the web, and it seems I should use 'VIA Rhine' chipsets. If I try this (or another possibility, I also tried 'real-tek 8136' and 'tulip' and some others, but this one is the one that I should use), I get a 'device or resource is busy'-message. Anyone any idea what the possible cause can be or how I can check what's wrong?

tnx,
Kurt

----- modprobe via-rhine -----
/lib/modules/2.2.20-idepci/net/via-rhine.o: init_module: Device or resource busy
/lib/modules/2.2.20-idepci/net/via-rhine.o: insmod /lib/modules/2.2.20-idepci/net/via-rhine.o failed
/lib/modules/2.2.20-idepci/net/via-rhine.o: Can't locate module 2
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
-----



----- lspci -v ----- [... upper part cutted ...] 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24d0 (rev 02) Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp.: Unknown device 24db (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 524c
Flags: bus master, medium devsel, latency 0
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at ffa0


00:1f.2 IDE interface: Intel Corp.: Unknown device 24d1 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corp.: Unknown device 524c
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 10
I/O ports at ec00
I/O ports at e800
I/O ports at e400
I/O ports at e000
I/O ports at dc00


00:1f.3 SMBus: Intel Corp.: Unknown device 24d3 (rev 02)
       Subsystem: Intel Corp.: Unknown device 524c
       Flags: medium devsel, IRQ 3
       I/O ports at c800

00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24d5 (rev 02)
Subsystem: Intel Corp.: Unknown device e000
Flags: bus master, medium devsel, latency 0, IRQ 3
Memory at ffaff800 (32-bit, non-prefetchable)
Memory at ffaff400 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2


01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro TF (prog-if 00 [VGA])
Subsystem: Unknown device 1787:0100
Flags: bus master, stepping, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at f0000000 (32-bit, prefetchable)
I/O ports at a800
Memory at ff8fc000 (32-bit, non-prefetchable)
Expansion ROM at ff8c0000 [disabled]
Capabilities: [50] AGP version 2.0
Capabilities: [5c] Power Management version 2


02:01.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3106 (rev 86)
Subsystem: D-Link System Inc: Unknown device 1403
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at b800
Memory at ff9ffc00 (32-bit, non-prefetchable)
Expansion ROM at ff9e0000 [disabled]
Capabilities: [40] Power Management version 2
-----



- To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs

Reply via email to