i've been using xcdroast for years on my thinkpad, but it consistently reports errors duplicating disks on my new desktop. i was trying to duplicate an ISO disk. i tried several input disks (as well as isos on my hard drive) and many output blank disks, both CDR and CDRW.
the xcdroast always reports the error after fixation, the scales are always 100% and 99% for read and write and yet there do not seem to be obvious errors in the logs, plus the newly-created disks mount and look good, and i've even booted off one of them. i have tried all sorts of options but the failures are always the same. note that when i use mondo, i burn using the same Plextor drive and the same batch of CDR and CDRWs and these disks are fine (i know, i've restored my system from them at least twice!) any ideas? -rei ------ trying to write a CDR------- Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "1,0,0" gracetime=2 fs=16384k driveropts=burnfree,noforcespeed -v -useinfo speed=10 -dao -eject -pad -overburn tsize=357664s -waiti -data - scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.1.25 Error trying to open /dev/scd0 exclusively ... retrying in 1 second. cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. TOC Type: 1 = CD-ROM Waiting for data on stdin... Using libscg version 'schily-0.7' Driveropts: 'burnfree,noforcespeed' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'PLEXTOR ' Identifikation : 'DVDR PX-708A ' Revision : '1.01' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x001B Profile: 0x001A Profile: 0x0014 Profile: 0x0013 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A Profile: 0x0009 (current) Profile: 0x0008 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC FORCESPEED SINGLESESSION HIDECDR Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1190112 = 1162 KB FIFO size : 16777216 = 16384 KB pregap1: -1 Track 01: data 698 MB padsize: 30 KB Total size: 802 MB (79:29.05) = 357679 sectors Lout start: 802 MB (79:31/04) = 357679 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -12508 (97:15/17) ATIP start of lead out: 359848 (79:59/73) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 22 Manufacturer: Ritek Co. Single session is OFF. Hide CDR is OFF. Blocks total: 359848 Blocks current: 359848 Blocks remaining: 2169 Forcespeed is OFF. Power-Rec is ON. Power-Rec write speed: 40x (recommended) Starting to write CD/DVD at speed 8 in real SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Performing OPC... Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: writing 30 KB of pad data. Track 01: Total bytes read/written: 732495872/732526592 (357679 sectors). Writing time: 622.303s Average write speed 7.7x. Min drive buffer fill was 95% Fixating... Fixating time: 12.072s Last selected write speed: 8x cdrecord: fifo had 11538 puts and 11538 gets. Max media write speed: 40x cdrecord: fifo was 0 times empty and 10944 times full, min fill was 99%. Last actual write speed: 8x -------- trying to write a CDRW--------------- Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "1,0,0" gracetime=2 fs=16384k driveropts=burnfree,noforcespeed -v -useinfo speed=4 -dao -eject -pad -data "/tmp/track-01.img" ... scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.1.25 Error trying to open /dev/scd0 exclusively ... retrying in 1 second. cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' Driveropts: 'burnfree,noforcespeed' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'PLEXTOR ' Identifikation : 'DVDR PX-708A ' Revision : '1.01' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x000A Profile: 0x001B Profile: 0x001A Profile: 0x0014 Profile: 0x0013 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A (current) Profile: 0x0009 Profile: 0x0008 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC FORCESPEED SINGLESESSION HIDECDR Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1190112 = 1162 KB FIFO size : 16777216 = 16384 KB pregap1: -1 Track 01: data 698 MB padsize: 30 KB Total size: 802 MB (79:29.05) = 357679 sectors Lout start: 802 MB (79:31/04) = 357679 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 3 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11745 (97:25/30) ATIP start of lead out: 359848 (79:59/73) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 4 A1 values: 24 1A CC A2 values: 26 B2 48 A3 values: 04 CF 80 Disk type: Phase change Manuf. index: 40 Manufacturer: INFODISC Technology Co., Ltd. Single session is OFF. Hide CDR is OFF. Blocks total: 359848 Blocks current: 359848 Blocks remaining: 2169 Forcespeed is OFF. Power-Rec is ON. Power-Rec write speed: 10x (recommended) Starting to write CD/DVD at speed 10 in real SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Performing OPC... Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: writing 30 KB of pad data. Track 01: Total bytes read/written: 732495872/732526592 (357679 sectors). Writing time: 502.278s Average write speed 9.6x. Min drive buffer fill was 99% Fixating... Fixating time: 9.658s Last selected write speed: 10x cdrecord: fifo had 11538 puts and 11538 gets. Max media write speed: 10x cdrecord: fifo was 0 times empty and 11282 times full, min fill was 99%. Last actual write speed: 10x -- Rei Shinozuka [EMAIL PROTECTED] Ridgewood, New Jersey - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
