Hi !
I am using Red Hat 8 with kernel 2.4.20-30.8.legacy.
I got a new Sony Reader/writer Optical Mouse .
How do I detect it in Red Hat 8.0
I did the following :-
modprobe input
modprobe hid
modrprobe mousedev
These kernel modules are loaded without error .
But still my usb mouse is not detected .
Attached are my dmesg and message .
Thank you for your help in advance.
Cheers,
bj
Linux version 2.4.20-30.8.legacy ([EMAIL PROTECTED]) (gcc version 3.2 20020903
(Red Hat Linux 8.0 3.2-7)) #1 Fri Feb 20 17:47:48 PST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/ hdb=ide-scsi
ide_setup: hdb=ide-scsi
Initializing CPU#0
Detected 2393.995 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4771.02 BogoMIPS
Memory: 511516k/524224k available (1340k kernel code, 10148k reserved, 999k
data, 128k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb270, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:DMA
hda: ST360020A, ATA DISK drive
hdb: SONY CD-RW CRX1611, ATAPI CD/DVD-ROM drive
blk: queue c03a6260, I/O limit 4095Mb (mask 0xffffffff)
hdd: ST380011A, ATA DISK drive
blk: queue c03a6808, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63, UDMA(100)
hdd: attached ide-disk driver.
hdd: host protected area => 1
hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda:hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
blk: queue c03a6260, I/O limit 4095Mb (mask 0xffffffff)
hdb: DMA disabled
ide0: reset: success
hda1 hda2 hda3 hda4 < hda5 hda6 >
hdd: hdd1 hdd2 < hdd5 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 126k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 128k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 5 for device 00:10.3
PCI: Sharing IRQ 5 with 00:0c.0
ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci-hcd 00:10.3: irq 5, pci mem e0849000
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:10.3 PCI cache line size corrected to 128.
ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Adding Swap: 1052248k swap-space (priority -1)
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide0: reset: success
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
hdb: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-RW CRX1611 Rev: TYS3
Type: CD-ROM ANSI SCSI revision: 02
IA-32 Microcode Update Driver: v1.11 <[EMAIL PROTECTED]>
microcode: CPU0 no microcode found! (sig=f27, pflags=4)
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
ip_tables: (C) 2000-2002 Netfilter core team
PCI: Found IRQ 11 for device 00:0a.0
PCI: Sharing IRQ 11 with 00:10.1
ttySHSF0 at I/O 0xc000 (irq = 11) is a Conexant HSF softmodem
(PCI-14f1:2f00-14f1:2002)
PCI: Found IRQ 5 for device 00:0c.0
PCI: Sharing IRQ 5 with 00:10.3
0000000.909: <7>^^^^^ SPIKE_NOT_FOUND ^^^^^^ LoopBackSpikeThreshold=-17000
ttySHSF1 at I/O 0xc800 (irq = 5) is a Conexant HSF softmodem
(PCI-14f1:2f00-14f1:2004)
0000001.336: <7>^^^^^ SPIKE_NOT_FOUND ^^^^^^ LoopBackSpikeThreshold=-17000
usb.c: registered new driver hsfusbcd2
via-rhine.c:v1.10-LK1.1.17 March-1-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
PCI: Found IRQ 11 for device 00:12.0
PCI: Sharing IRQ 11 with 00:0d.0
PCI: Sharing IRQ 11 with 00:10.0
divert: allocating divert_blk for eth0
eth0: VIA VT6102 Rhine-II at 0xe400, 00:50:70:c4:10:77, IRQ 11.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 12 for device 00:0b.0
PCI: Sharing IRQ 12 with 00:10.2
PCI: Sharing IRQ 12 with 00:11.5
divert: allocating divert_blk for eth1
eth1: RealTek RTL-8029 found at 0xc400, IRQ 12, 52:54:AB:3E:DC:78.
Mar 11 09:59:12 HOME syslogd 1.4.1: restart.
Mar 11 10:01:51 HOME kernel: cnxthsf_OsFloatSuffix: Id=4 used bit was FALSE !
Mar 11 10:06:33 HOME shutdown: shutting down for system reboot
Mar 11 10:06:33 HOME init: Switching to runlevel: 6
Mar 11 10:06:33 HOME login(pam_unix)[916]: session closed for user root
Mar 11 10:06:34 HOME anacron: anacron shutdown succeeded
Mar 11 10:06:35 HOME atd: atd shutdown succeeded
Mar 11 10:06:35 HOME rc: Stopping keytable: succeeded
Mar 11 10:06:35 HOME gpm: gpm shutdown succeeded
Mar 11 10:06:35 HOME sshd: sshd -TERM succeeded
Mar 11 10:06:35 HOME sendmail: sendmail shutdown succeeded
Mar 11 10:06:35 HOME sendmail: sm-client shutdown succeeded
Mar 11 10:06:35 HOME xinetd[816]: Exiting...
Mar 11 10:06:35 HOME xinetd: xinetd shutdown succeeded
Mar 11 10:06:35 HOME crond: crond shutdown succeeded
Mar 11 10:06:35 HOME apmd[764]: Exiting
Mar 11 10:06:36 HOME apmd: apmd shutdown succeeded
Mar 11 10:06:37 HOME dd: 1+0 records in
Mar 11 10:06:37 HOME dd: 1+0 records out
Mar 11 10:06:37 HOME random: Saving random seed: succeeded
Mar 11 10:06:37 HOME rpc.statd[682]: Caught signal 15, un-registering and
exiting.
Mar 11 10:06:37 HOME nfslock: rpc.statd shutdown succeeded
Mar 11 10:06:37 HOME portmap: portmap shutdown succeeded
Mar 11 10:06:37 HOME kernel: Kernel logging (proc) stopped.
Mar 11 10:06:37 HOME kernel: Kernel log daemon terminating.
Mar 11 10:06:38 HOME syslog: klogd shutdown succeeded
Mar 11 10:06:38 HOME exiting on signal 15
Mar 11 10:08:15 HOME syslogd 1.4.1: restart.
Mar 11 10:08:15 HOME syslog: syslogd startup succeeded
Mar 11 10:08:15 HOME kernel: klogd 1.4.1, log source = /proc/kmsg started.
Mar 11 10:08:15 HOME kernel: Linux version 2.4.20-30.8.legacy ([EMAIL
PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Fri Feb 20
17:47:48 PST 2004
Mar 11 10:08:15 HOME kernel: BIOS-provided physical RAM map:
Mar 11 10:08:15 HOME kernel: BIOS-e820: 0000000000000000 - 00000000000a0000
(usable)
Mar 11 10:08:15 HOME kernel: BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
Mar 11 10:08:15 HOME kernel: BIOS-e820: 0000000000100000 - 000000001fff0000
(usable)
Mar 11 10:08:15 HOME kernel: BIOS-e820: 000000001fff0000 - 000000001fff3000
(ACPI NVS)
Mar 11 10:08:15 HOME kernel: BIOS-e820: 000000001fff3000 - 0000000020000000
(ACPI data)
Mar 11 10:08:15 HOME kernel: BIOS-e820: 00000000fec00000 - 0000000100000000
(reserved)
Mar 11 10:08:15 HOME kernel: 0MB HIGHMEM available.
Mar 11 10:08:15 HOME kernel: 511MB LOWMEM available.
Mar 11 10:08:15 HOME kernel: On node 0 totalpages: 131056
Mar 11 10:08:15 HOME syslog: klogd startup succeeded
Mar 11 10:08:15 HOME kernel: zone(0): 4096 pages.
Mar 11 10:08:15 HOME kernel: zone(1): 126960 pages.
Mar 11 10:08:15 HOME portmap: portmap startup succeeded
Mar 11 10:08:15 HOME kernel: zone(2): 0 pages.
Mar 11 10:08:15 HOME kernel: Kernel command line: ro root=LABEL=/ hdb=ide-scsi
Mar 11 10:08:15 HOME kernel: ide_setup: hdb=ide-scsi
Mar 11 10:08:15 HOME nfslock: rpc.statd startup succeeded
Mar 11 10:08:15 HOME rpc.statd[684]: Version 1.0.1 Starting
Mar 11 10:08:15 HOME kernel: Initializing CPU#0
Mar 11 10:08:15 HOME keytable: Loading keymap:
Mar 11 10:08:15 HOME kernel: Detected 2393.995 MHz processor.
Mar 11 10:08:15 HOME keytable:
Mar 11 10:08:15 HOME kernel: Console: colour VGA+ 80x25
Mar 11 10:08:15 HOME keytable:
Mar 11 10:08:16 HOME kernel: Calibrating delay loop... 4771.02 BogoMIPS
Mar 11 10:08:16 HOME rc: Starting keytable: succeeded
Mar 11 10:08:16 HOME kernel: Memory: 511516k/524224k available (1340k kernel
code, 10148k reserved, 999k data, 128k init, 0k highmem)
Mar 11 10:08:16 HOME kernel: Dentry cache hash table entries: 65536 (order: 7,
524288 bytes)
Mar 11 10:08:16 HOME random: Initializing random number generator: succeeded
Mar 11 10:08:16 HOME kernel: Inode cache hash table entries: 32768 (order: 6,
262144 bytes)
Mar 11 10:08:16 HOME kernel: Mount cache hash table entries: 512 (order: 0,
4096 bytes)
Mar 11 10:08:16 HOME kernel: Buffer-cache hash table entries: 32768 (order: 5,
131072 bytes)
Mar 11 10:08:16 HOME rc: Starting pcmcia: succeeded
Mar 11 10:08:16 HOME kernel: Page-cache hash table entries: 131072 (order: 7,
524288 bytes)
Mar 11 10:08:16 HOME kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Mar 11 10:08:16 HOME netfs: Mounting other filesystems: succeeded
Mar 11 10:08:16 HOME kernel: CPU: L2 cache: 512K
Mar 11 10:08:16 HOME kernel: Intel machine check architecture supported.
Mar 11 10:08:12 HOME ifup: failed; no link present. Check cable?
Mar 11 10:08:16 HOME apmd[766]: Version 3.0.2 (APM BIOS 1.2, Linux driver 1.16)
Mar 11 10:08:16 HOME apmd: apmd startup succeeded
Mar 11 10:08:17 HOME kernel: Intel machine check reporting enabled on CPU#0.
Mar 11 10:08:12 HOME network: Bringing up interface eth0: failed
Mar 11 10:08:17 HOME autofs: automount startup succeeded
Mar 11 10:08:17 HOME kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Mar 11 10:08:17 HOME sshd: Starting sshd:
Mar 11 10:08:17 HOME kernel: Enabling fast FPU save and restore... done.
Mar 11 10:08:18 HOME kernel: Enabling unmasked SIMD FPU exception support...
done.
Mar 11 10:08:18 HOME kernel: Checking 'hlt' instruction... OK.
Mar 11 10:08:18 HOME kernel: POSIX conformance testing by UNIFIX
Mar 11 10:08:18 HOME kernel: mtrr: v1.40 (20010327) Richard Gooch ([EMAIL
PROTECTED])
Mar 11 10:08:18 HOME apmd[766]: Charge: * * * (-1% unknown)
Mar 11 10:08:18 HOME kernel: mtrr: detected mtrr type: Intel
Mar 11 10:08:18 HOME kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb270, last
bus=1
Mar 11 10:08:18 HOME kernel: PCI: Using configuration type 1
Mar 11 10:08:18 HOME kernel: PCI: Probing PCI hardware
Mar 11 10:08:18 HOME kernel: PCI: Using IRQ router VIA [1106/3177] at 00:11.0
Mar 11 10:08:18 HOME kernel: isapnp: Scanning for PnP cards...
Mar 11 10:08:19 HOME kernel: isapnp: No Plug & Play device found
Mar 11 10:08:19 HOME kernel: Linux NET4.0 for Linux 2.4
Mar 11 10:08:19 HOME kernel: Based upon Swansea University Computer Society
NET3.039
Mar 11 10:08:19 HOME kernel: Initializing RT netlink socket
Mar 11 10:08:19 HOME kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version
1.16)
Mar 11 10:08:19 HOME kernel: Starting kswapd
Mar 11 10:08:19 HOME kernel: VFS: Disk quotas vdquot_6.5.1
Mar 11 10:08:19 HOME kernel: Detected PS/2 Mouse Port.
Mar 11 10:08:19 HOME sshd: succeeded
Mar 11 10:08:19 HOME kernel: pty: 2048 Unix98 ptys configured
Mar 11 10:08:19 HOME sshd:
Mar 11 10:08:19 HOME kernel: Serial driver version 5.05c (2001-07-08) with
MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Mar 11 10:08:19 HOME rc: Starting sshd: succeeded
Mar 11 10:08:19 HOME kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Mar 11 10:08:19 HOME kernel: ttyS1 at 0x02f8 (irq = 3) is a 16550A
Mar 11 10:08:19 HOME kernel: Real Time Clock Driver v1.10e
Mar 11 10:08:20 HOME kernel: Floppy drive(s): fd0 is 1.44M
Mar 11 10:08:20 HOME kernel: FDC 0 is a post-1991 82077
Mar 11 10:08:20 HOME kernel: NET4: Frame Diverter 0.46
Mar 11 10:08:20 HOME kernel: RAMDISK driver initialized: 16 RAM disks of 4096K
size 1024 blocksize
Mar 11 10:08:20 HOME kernel: Uniform Multi-Platform E-IDE driver Revision:
7.00beta3-.2.4
Mar 11 10:08:20 HOME kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
Mar 11 10:08:20 HOME kernel: VP_IDE: IDE controller at PCI slot 00:11.1
Mar 11 10:08:20 HOME kernel: VP_IDE: chipset revision 6
Mar 11 10:08:21 HOME kernel: VP_IDE: not 100%% native mode: will probe irqs
later
Mar 11 10:08:21 HOME kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller
on pci00:11.1
Mar 11 10:08:21 HOME kernel: ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings:
hda:DMA, hdb:DMA
Mar 11 10:08:21 HOME kernel: ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings:
hdc:pio, hdd:DMA
Mar 11 10:08:21 HOME kernel: hda: ST360020A, ATA DISK drive
Mar 11 10:08:21 HOME kernel: hdb: SONY CD-RW CRX1611, ATAPI CD/DVD-ROM drive
Mar 11 10:08:21 HOME kernel: blk: queue c03a6260, I/O limit 4095Mb (mask
0xffffffff)
Mar 11 10:08:21 HOME kernel: hdd: ST380011A, ATA DISK drive
Mar 11 10:08:21 HOME kernel: blk: queue c03a6808, I/O limit 4095Mb (mask
0xffffffff)
Mar 11 10:08:21 HOME kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 11 10:08:21 HOME kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 11 10:08:21 HOME kernel: hda: attached ide-disk driver.
Mar 11 10:08:21 HOME kernel: hda: host protected area => 1
Mar 11 10:08:21 HOME kernel: hda: 117231408 sectors (60022 MB) w/2048KiB Cache,
CHS=7297/255/63, UDMA(100)
Mar 11 10:08:21 HOME kernel: hdd: attached ide-disk driver.
Mar 11 10:08:21 HOME kernel: hdd: host protected area => 1
Mar 11 10:08:21 HOME kernel: hdd: 156301488 sectors (80026 MB) w/2048KiB Cache,
CHS=9729/255/63, UDMA(100)
Mar 11 10:08:21 HOME kernel: ide-floppy driver 0.99.newide
Mar 11 10:08:21 HOME kernel: Partition check:
Mar 11 10:08:21 HOME kernel: hda:hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 11 10:08:22 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 11 10:08:22 HOME kernel: blk: queue c03a6260, I/O limit 4095Mb (mask
0xffffffff)
Mar 11 10:08:22 HOME kernel: hdb: DMA disabled
Mar 11 10:08:22 HOME kernel: ide0: reset: success
Mar 11 10:08:22 HOME kernel: hda1 hda2 hda3 hda4 < hda5 hda6 >
Mar 11 10:08:22 HOME kernel: hdd: hdd1 hdd2 < hdd5 >
Mar 11 10:08:22 HOME kernel: ide-floppy driver 0.99.newide
Mar 11 10:08:22 HOME kernel: md: md driver 0.90.0 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Mar 11 10:08:22 HOME kernel: md: Autodetecting RAID arrays.
Mar 11 10:08:22 HOME kernel: md: autorun ...
Mar 11 10:08:22 HOME kernel: md: ... autorun DONE.
Mar 11 10:08:22 HOME kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Mar 11 10:08:22 HOME kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Mar 11 10:08:22 HOME kernel: IP: routing cache hash table of 4096 buckets,
32Kbytes
Mar 11 10:08:22 HOME kernel: TCP: Hash tables configured (established 32768
bind 65536)
Mar 11 10:08:22 HOME kernel: Linux IP multicast router 0.06 plus PIM-SM
Mar 11 10:08:22 HOME kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Mar 11 10:08:22 HOME kernel: RAMDISK: Compressed image found at block 0
Mar 11 10:08:22 HOME kernel: Freeing initrd memory: 126k freed
Mar 11 10:08:22 HOME kernel: VFS: Mounted root (ext2 filesystem).
Mar 11 10:08:22 HOME kernel: Journalled Block Device driver loaded
Mar 11 10:08:22 HOME kernel: kjournald starting. Commit interval 5 seconds
Mar 11 10:08:22 HOME kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 11 10:08:22 HOME kernel: Freeing unused kernel memory: 128k freed
Mar 11 10:08:22 HOME kernel: usb.c: registered new driver usbdevfs
Mar 11 10:08:22 HOME kernel: usb.c: registered new driver hub
Mar 11 10:08:22 HOME kernel: PCI: Found IRQ 5 for device 00:10.3
Mar 11 10:08:22 HOME kernel: PCI: Sharing IRQ 5 with 00:0c.0
Mar 11 10:08:22 HOME kernel: ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
Mar 11 10:08:23 HOME kernel: ehci-hcd 00:10.3: irq 5, pci mem e0849000
Mar 11 10:08:23 HOME kernel: usb.c: new USB bus registered, assigned bus number
1
Mar 11 10:08:23 HOME kernel: PCI: 00:10.3 PCI cache line size set incorrectly
(32 bytes) by BIOS/FW.
Mar 11 10:08:23 HOME kernel: PCI: 00:10.3 PCI cache line size corrected to 128.
Mar 11 10:08:23 HOME kernel: ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00,
driver 2003-Jan-22
Mar 11 10:08:23 HOME kernel: hub.c: USB hub found
Mar 11 10:08:23 HOME kernel: hub.c: 6 ports detected
Mar 11 10:08:23 HOME kernel: usb.c: registered new driver hiddev
Mar 11 10:08:23 HOME kernel: usb.c: registered new driver hid
Mar 11 10:08:23 HOME kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik
<[EMAIL PROTECTED]>
Mar 11 10:08:23 HOME kernel: hid-core.c: USB HID support drivers
Mar 11 10:08:23 HOME kernel: mice: PS/2 mouse device common for all mice
Mar 11 10:08:23 HOME kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2),
internal journal
Mar 11 10:08:23 HOME kernel: Adding Swap: 1052248k swap-space (priority -1)
Mar 11 10:08:23 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 11 10:08:23 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 11 10:08:23 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 11 10:08:23 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 11 10:08:23 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 11 10:08:23 HOME xinetd: xinetd startup succeeded
Mar 11 10:08:23 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 11 10:08:23 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 11 10:08:24 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 11 10:08:24 HOME kernel: ide0: reset: success
Mar 11 10:08:24 HOME kernel: kjournald starting. Commit interval 5 seconds
Mar 11 10:08:24 HOME kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5),
internal journal
Mar 11 10:08:24 HOME kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 11 10:08:24 HOME kernel: kjournald starting. Commit interval 5 seconds
Mar 11 10:08:24 HOME kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6),
internal journal
Mar 11 10:08:24 HOME kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 11 10:08:24 HOME kernel: SCSI subsystem driver Revision: 1.00
Mar 11 10:08:24 HOME kernel: hdb: attached ide-scsi driver.
Mar 11 10:08:24 HOME kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI
devices
Mar 11 10:08:24 HOME kernel: Vendor: SONY Model: CD-RW CRX1611 Rev:
TYS3
Mar 11 10:08:24 HOME kernel: Type: CD-ROM ANSI
SCSI revision: 02
Mar 11 10:08:24 HOME kernel: IA-32 Microcode Update Driver: v1.11 <[EMAIL
PROTECTED]>
Mar 11 10:08:25 HOME kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Mar 11 10:08:25 HOME kernel: ip_tables: (C) 2000-2002 Netfilter core team
Mar 11 10:08:25 HOME kernel: PCI: Found IRQ 11 for device 00:0a.0
Mar 11 10:08:25 HOME kernel: PCI: Sharing IRQ 11 with 00:10.1
Mar 11 10:08:25 HOME kernel: ttySHSF0 at I/O 0xc000 (irq = 11) is a Conexant
HSF softmodem (PCI-14f1:2f00-14f1:2002)
Mar 11 10:08:25 HOME kernel: PCI: Found IRQ 5 for device 00:0c.0
Mar 11 10:08:25 HOME kernel: PCI: Sharing IRQ 5 with 00:10.3
Mar 11 10:08:26 HOME kernel: ttySHSF1 at I/O 0xc800 (irq = 5) is a Conexant HSF
softmodem (PCI-14f1:2f00-14f1:2004)
Mar 11 10:08:26 HOME kernel: usb.c: registered new driver hsfusbcd2
Mar 11 10:08:26 HOME kernel: via-rhine.c:v1.10-LK1.1.17 March-1-2003 Written
by Donald Becker
Mar 11 10:08:26 HOME kernel: http://www.scyld.com/network/via-rhine.html
Mar 11 10:08:26 HOME kernel: PCI: Found IRQ 11 for device 00:12.0
Mar 11 10:08:26 HOME kernel: PCI: Sharing IRQ 11 with 00:0d.0
Mar 11 10:08:26 HOME kernel: PCI: Sharing IRQ 11 with 00:10.0
Mar 11 10:08:26 HOME kernel: eth0: VIA VT6102 Rhine-II at 0xe400,
00:50:70:c4:10:77, IRQ 11.
Mar 11 10:08:26 HOME kernel: eth0: MII PHY found at address 1, status 0x7849
advertising 05e1 Link 0000.
Mar 11 10:08:26 HOME kernel: ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
Mar 11 10:08:26 HOME kernel: http://www.scyld.com/network/ne2k-pci.html
Mar 11 10:08:27 HOME kernel: PCI: Found IRQ 12 for device 00:0b.0
Mar 11 10:08:27 HOME kernel: PCI: Sharing IRQ 12 with 00:10.2
Mar 11 10:08:27 HOME kernel: PCI: Sharing IRQ 12 with 00:11.5
Mar 11 10:08:27 HOME kernel: eth1: RealTek RTL-8029 found at 0xc400, IRQ 12,
52:54:AB:3E:DC:78.
Mar 11 10:08:29 HOME xinetd[818]: xinetd Version 2.3.7 started with libwrap
options compiled in.
Mar 11 10:08:29 HOME xinetd[818]: Started working: 1 available service
Mar 11 10:08:29 HOME sendmail: sendmail startup succeeded
Mar 11 10:08:30 HOME sendmail: sm-client startup succeeded
Mar 11 10:08:30 HOME gpm[860]: oops() invoked from gpm.c(978)
Mar 11 10:08:30 HOME gpm[860]: /dev/mouse: No such file or directory
Mar 11 10:08:30 HOME gpm: gpm startup succeeded
Mar 11 10:08:30 HOME crond: crond startup succeeded
Mar 11 10:08:31 HOME xfs: xfs startup failed
Mar 11 10:08:31 HOME anacron: anacron startup succeeded
Mar 11 10:08:31 HOME atd: atd startup succeeded
Mar 11 10:08:31 HOME wine: Registering binary handler for Windows applications
Mar 11 10:08:31 HOME rc: Starting wine: succeeded
Mar 11 10:08:36 HOME login(pam_unix)[918]: authentication failure;
logname=LOGIN uid=0 euid=0 tty=tty1 ruser= rhost= user=root
Mar 11 10:08:38 HOME login[918]: FAILED LOGIN 1 FROM (null) FOR root,
Authentication failure
Mar 11 10:08:40 HOME login(pam_unix)[918]: session opened for user root by
LOGIN(uid=0)
Mar 11 10:08:41 HOME -- root[918]: ROOT LOGIN ON tty1
Mar 11 10:14:33 HOME shutdown: shutting down for system halt
Mar 11 10:14:33 HOME init: Switching to runlevel: 0
Mar 11 10:14:33 HOME login(pam_unix)[918]: session closed for user root
Mar 11 10:14:34 HOME anacron: anacron shutdown succeeded
Mar 11 10:14:35 HOME atd: atd shutdown succeeded
Mar 11 10:14:35 HOME rc: Stopping keytable: succeeded
Mar 11 10:14:35 HOME gpm: gpm shutdown failed
Mar 11 10:14:35 HOME sshd: sshd -TERM succeeded
Mar 11 10:14:35 HOME sendmail: sendmail shutdown succeeded
Mar 11 10:14:35 HOME sendmail: sm-client shutdown succeeded
Mar 11 10:14:35 HOME xinetd[818]: Exiting...
Mar 11 10:14:35 HOME xinetd: xinetd shutdown succeeded
Mar 11 10:14:35 HOME crond: crond shutdown succeeded
Mar 11 10:14:35 HOME apmd[766]: Exiting
Mar 11 10:14:36 HOME apmd: apmd shutdown succeeded
Mar 11 10:14:36 HOME dd: 1+0 records in
Mar 11 10:14:36 HOME dd: 1+0 records out
Mar 11 10:14:36 HOME random: Saving random seed: succeeded
Mar 11 10:14:37 HOME rpc.statd[684]: Caught signal 15, un-registering and
exiting.
Mar 11 10:14:37 HOME nfslock: rpc.statd shutdown succeeded
Mar 11 10:14:37 HOME portmap: portmap shutdown succeeded
Mar 11 10:14:37 HOME kernel: Kernel logging (proc) stopped.
Mar 11 10:14:37 HOME kernel: Kernel log daemon terminating.
Mar 11 10:14:38 HOME syslog: klogd shutdown succeeded
Mar 11 10:14:38 HOME exiting on signal 15
Mar 12 20:26:25 HOME syslogd 1.4.1: restart.
Mar 12 20:26:25 HOME syslog: syslogd startup succeeded
Mar 12 20:26:25 HOME kernel: klogd 1.4.1, log source = /proc/kmsg started.
Mar 12 20:26:25 HOME kernel: Linux version 2.4.20-30.8.legacy ([EMAIL
PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Fri Feb 20
17:47:48 PST 2004
Mar 12 20:26:25 HOME kernel: BIOS-provided physical RAM map:
Mar 12 20:26:25 HOME kernel: BIOS-e820: 0000000000000000 - 00000000000a0000
(usable)
Mar 12 20:26:25 HOME kernel: BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
Mar 12 20:26:25 HOME kernel: BIOS-e820: 0000000000100000 - 000000001fff0000
(usable)
Mar 12 20:26:25 HOME kernel: BIOS-e820: 000000001fff0000 - 000000001fff3000
(ACPI NVS)
Mar 12 20:26:25 HOME kernel: BIOS-e820: 000000001fff3000 - 0000000020000000
(ACPI data)
Mar 12 20:26:25 HOME kernel: BIOS-e820: 00000000fec00000 - 0000000100000000
(reserved)
Mar 12 20:26:25 HOME kernel: 0MB HIGHMEM available.
Mar 12 20:26:25 HOME kernel: 511MB LOWMEM available.
Mar 12 20:26:25 HOME kernel: On node 0 totalpages: 131056
Mar 12 20:26:25 HOME syslog: klogd startup succeeded
Mar 12 20:26:25 HOME kernel: zone(0): 4096 pages.
Mar 12 20:26:25 HOME kernel: zone(1): 126960 pages.
Mar 12 20:26:25 HOME portmap: portmap startup succeeded
Mar 12 20:26:25 HOME kernel: zone(2): 0 pages.
Mar 12 20:26:26 HOME kernel: Kernel command line: ro root=LABEL=/ hdb=ide-scsi
Mar 12 20:26:26 HOME nfslock: rpc.statd startup succeeded
Mar 12 20:26:26 HOME rpc.statd[682]: Version 1.0.1 Starting
Mar 12 20:26:26 HOME kernel: ide_setup: hdb=ide-scsi
Mar 12 20:26:26 HOME keytable: Loading keymap:
Mar 12 20:26:26 HOME kernel: Initializing CPU#0
Mar 12 20:26:26 HOME keytable:
Mar 12 20:26:26 HOME kernel: Detected 2393.995 MHz processor.
Mar 12 20:26:26 HOME keytable:
Mar 12 20:26:26 HOME kernel: Console: colour VGA+ 80x25
Mar 12 20:26:26 HOME rc: Starting keytable: succeeded
Mar 12 20:26:26 HOME kernel: Calibrating delay loop... 4771.02 BogoMIPS
Mar 12 20:26:26 HOME kernel: Memory: 511516k/524224k available (1340k kernel
code, 10148k reserved, 999k data, 128k init, 0k highmem)
Mar 12 20:26:26 HOME random: Initializing random number generator: succeeded
Mar 12 20:26:26 HOME kernel: Dentry cache hash table entries: 65536 (order: 7,
524288 bytes)
Mar 12 20:26:26 HOME kernel: Inode cache hash table entries: 32768 (order: 6,
262144 bytes)
Mar 12 20:26:26 HOME kernel: Mount cache hash table entries: 512 (order: 0,
4096 bytes)
Mar 12 20:26:26 HOME rc: Starting pcmcia: succeeded
Mar 12 20:26:27 HOME kernel: Buffer-cache hash table entries: 32768 (order: 5,
131072 bytes)
Mar 12 20:26:27 HOME kernel: Page-cache hash table entries: 131072 (order: 7,
524288 bytes)
Mar 12 20:26:27 HOME netfs: Mounting other filesystems: succeeded
Mar 12 20:26:27 HOME kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Mar 12 20:26:27 HOME kernel: CPU: L2 cache: 512K
Mar 12 20:26:23 HOME ifup: failed; no link present. Check cable?
Mar 12 20:26:27 HOME apmd[764]: Version 3.0.2 (APM BIOS 1.2, Linux driver 1.16)
Mar 12 20:26:27 HOME apmd: apmd startup succeeded
Mar 12 20:26:27 HOME kernel: Intel machine check architecture supported.
Mar 12 20:26:23 HOME network: Bringing up interface eth0: failed
Mar 12 20:26:27 HOME kernel: Intel machine check reporting enabled on CPU#0.
Mar 12 20:26:27 HOME autofs: automount startup succeeded
Mar 12 20:26:28 HOME sshd: Starting sshd:
Mar 12 20:26:28 HOME kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Mar 12 20:26:28 HOME kernel: Enabling fast FPU save and restore... done.
Mar 12 20:26:28 HOME kernel: Enabling unmasked SIMD FPU exception support...
done.
Mar 12 20:26:28 HOME kernel: Checking 'hlt' instruction... OK.
Mar 12 20:26:28 HOME apmd[764]: Charge: * * * (-1% unknown)
Mar 12 20:26:28 HOME kernel: POSIX conformance testing by UNIFIX
Mar 12 20:26:29 HOME kernel: mtrr: v1.40 (20010327) Richard Gooch ([EMAIL
PROTECTED])
Mar 12 20:26:29 HOME kernel: mtrr: detected mtrr type: Intel
Mar 12 20:26:29 HOME kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb270, last
bus=1
Mar 12 20:26:29 HOME kernel: PCI: Using configuration type 1
Mar 12 20:26:29 HOME kernel: PCI: Probing PCI hardware
Mar 12 20:26:29 HOME kernel: PCI: Using IRQ router VIA [1106/3177] at 00:11.0
Mar 12 20:26:29 HOME kernel: isapnp: Scanning for PnP cards...
Mar 12 20:26:29 HOME kernel: isapnp: No Plug & Play device found
Mar 12 20:26:29 HOME kernel: Linux NET4.0 for Linux 2.4
Mar 12 20:26:29 HOME kernel: Based upon Swansea University Computer Society
NET3.039
Mar 12 20:26:29 HOME kernel: Initializing RT netlink socket
Mar 12 20:26:29 HOME kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version
1.16)
Mar 12 20:26:29 HOME kernel: Starting kswapd
Mar 12 20:26:29 HOME kernel: VFS: Disk quotas vdquot_6.5.1
Mar 12 20:26:29 HOME sshd: succeeded
Mar 12 20:26:30 HOME kernel: Detected PS/2 Mouse Port.
Mar 12 20:26:30 HOME sshd:
Mar 12 20:26:30 HOME kernel: pty: 2048 Unix98 ptys configured
Mar 12 20:26:30 HOME rc: Starting sshd: succeeded
Mar 12 20:26:30 HOME kernel: Serial driver version 5.05c (2001-07-08) with
MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Mar 12 20:26:30 HOME kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Mar 12 20:26:30 HOME kernel: ttyS1 at 0x02f8 (irq = 3) is a 16550A
Mar 12 20:26:30 HOME kernel: Real Time Clock Driver v1.10e
Mar 12 20:26:30 HOME kernel: Floppy drive(s): fd0 is 1.44M
Mar 12 20:26:30 HOME kernel: FDC 0 is a post-1991 82077
Mar 12 20:26:30 HOME kernel: NET4: Frame Diverter 0.46
Mar 12 20:26:30 HOME kernel: RAMDISK driver initialized: 16 RAM disks of 4096K
size 1024 blocksize
Mar 12 20:26:31 HOME kernel: Uniform Multi-Platform E-IDE driver Revision:
7.00beta3-.2.4
Mar 12 20:26:31 HOME kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
Mar 12 20:26:31 HOME kernel: VP_IDE: IDE controller at PCI slot 00:11.1
Mar 12 20:26:31 HOME kernel: VP_IDE: chipset revision 6
Mar 12 20:26:31 HOME kernel: VP_IDE: not 100%% native mode: will probe irqs
later
Mar 12 20:26:31 HOME kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller
on pci00:11.1
Mar 12 20:26:31 HOME kernel: ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings:
hda:DMA, hdb:DMA
Mar 12 20:26:31 HOME kernel: ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings:
hdc:pio, hdd:DMA
Mar 12 20:26:31 HOME kernel: hda: ST360020A, ATA DISK drive
Mar 12 20:26:32 HOME kernel: hdb: SONY CD-RW CRX1611, ATAPI CD/DVD-ROM drive
Mar 12 20:26:32 HOME kernel: blk: queue c03a6260, I/O limit 4095Mb (mask
0xffffffff)
Mar 12 20:26:32 HOME kernel: hdd: ST380011A, ATA DISK drive
Mar 12 20:26:32 HOME kernel: blk: queue c03a6808, I/O limit 4095Mb (mask
0xffffffff)
Mar 12 20:26:32 HOME kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 12 20:26:32 HOME kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 12 20:26:32 HOME kernel: hda: attached ide-disk driver.
Mar 12 20:26:32 HOME kernel: hda: host protected area => 1
Mar 12 20:26:32 HOME kernel: hda: 117231408 sectors (60022 MB) w/2048KiB Cache,
CHS=7297/255/63, UDMA(100)
Mar 12 20:26:32 HOME kernel: hdd: attached ide-disk driver.
Mar 12 20:26:32 HOME kernel: hdd: host protected area => 1
Mar 12 20:26:32 HOME kernel: hdd: 156301488 sectors (80026 MB) w/2048KiB Cache,
CHS=9729/255/63, UDMA(100)
Mar 12 20:26:32 HOME kernel: ide-floppy driver 0.99.newide
Mar 12 20:26:32 HOME kernel: Partition check:
Mar 12 20:26:32 HOME kernel: hda:hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 12 20:26:32 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 12 20:26:32 HOME kernel: blk: queue c03a6260, I/O limit 4095Mb (mask
0xffffffff)
Mar 12 20:26:32 HOME kernel: hdb: DMA disabled
Mar 12 20:26:32 HOME kernel: ide0: reset: success
Mar 12 20:26:32 HOME kernel: hda1 hda2 hda3 hda4 < hda5 hda6 >
Mar 12 20:26:32 HOME kernel: hdd: hdd1 hdd2 < hdd5 >
Mar 12 20:26:32 HOME kernel: ide-floppy driver 0.99.newide
Mar 12 20:26:32 HOME kernel: md: md driver 0.90.0 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Mar 12 20:26:32 HOME kernel: md: Autodetecting RAID arrays.
Mar 12 20:26:32 HOME kernel: md: autorun ...
Mar 12 20:26:33 HOME kernel: md: ... autorun DONE.
Mar 12 20:26:33 HOME kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Mar 12 20:26:33 HOME kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Mar 12 20:26:33 HOME kernel: IP: routing cache hash table of 4096 buckets,
32Kbytes
Mar 12 20:26:33 HOME kernel: TCP: Hash tables configured (established 32768
bind 65536)
Mar 12 20:26:33 HOME kernel: Linux IP multicast router 0.06 plus PIM-SM
Mar 12 20:26:33 HOME kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Mar 12 20:26:33 HOME kernel: RAMDISK: Compressed image found at block 0
Mar 12 20:26:33 HOME kernel: Freeing initrd memory: 126k freed
Mar 12 20:26:33 HOME kernel: VFS: Mounted root (ext2 filesystem).
Mar 12 20:26:33 HOME kernel: Journalled Block Device driver loaded
Mar 12 20:26:33 HOME kernel: kjournald starting. Commit interval 5 seconds
Mar 12 20:26:33 HOME kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 12 20:26:33 HOME kernel: Freeing unused kernel memory: 128k freed
Mar 12 20:26:33 HOME kernel: usb.c: registered new driver usbdevfs
Mar 12 20:26:33 HOME kernel: usb.c: registered new driver hub
Mar 12 20:26:33 HOME kernel: PCI: Found IRQ 5 for device 00:10.3
Mar 12 20:26:33 HOME kernel: PCI: Sharing IRQ 5 with 00:0c.0
Mar 12 20:26:33 HOME kernel: ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
Mar 12 20:26:33 HOME kernel: ehci-hcd 00:10.3: irq 5, pci mem e0849000
Mar 12 20:26:33 HOME kernel: usb.c: new USB bus registered, assigned bus number
1
Mar 12 20:26:33 HOME kernel: PCI: 00:10.3 PCI cache line size set incorrectly
(32 bytes) by BIOS/FW.
Mar 12 20:26:33 HOME kernel: PCI: 00:10.3 PCI cache line size corrected to 128.
Mar 12 20:26:33 HOME kernel: ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00,
driver 2003-Jan-22
Mar 12 20:26:33 HOME kernel: hub.c: USB hub found
Mar 12 20:26:33 HOME kernel: hub.c: 6 ports detected
Mar 12 20:26:33 HOME kernel: usb.c: registered new driver hiddev
Mar 12 20:26:33 HOME kernel: usb.c: registered new driver hid
Mar 12 20:26:33 HOME kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik
<[EMAIL PROTECTED]>
Mar 12 20:26:33 HOME kernel: hid-core.c: USB HID support drivers
Mar 12 20:26:33 HOME kernel: mice: PS/2 mouse device common for all mice
Mar 12 20:26:33 HOME kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2),
internal journal
Mar 12 20:26:33 HOME kernel: Adding Swap: 1052248k swap-space (priority -1)
Mar 12 20:26:33 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 12 20:26:34 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 12 20:26:34 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 12 20:26:34 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 12 20:26:34 HOME xinetd: xinetd startup succeeded
Mar 12 20:26:34 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 12 20:26:34 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 12 20:26:34 HOME kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Mar 12 20:26:34 HOME kernel: hda: dma_intr: error=0x84 { DriveStatusError
BadCRC }
Mar 12 20:26:34 HOME kernel: ide0: reset: success
Mar 12 20:26:34 HOME kernel: kjournald starting. Commit interval 5 seconds
Mar 12 20:26:34 HOME kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5),
internal journal
Mar 12 20:26:34 HOME kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 12 20:26:34 HOME kernel: kjournald starting. Commit interval 5 seconds
Mar 12 20:26:34 HOME kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6),
internal journal
Mar 12 20:26:34 HOME kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 12 20:26:35 HOME kernel: SCSI subsystem driver Revision: 1.00
Mar 12 20:26:35 HOME kernel: hdb: attached ide-scsi driver.
Mar 12 20:26:35 HOME kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI
devices
Mar 12 20:26:35 HOME kernel: Vendor: SONY Model: CD-RW CRX1611 Rev:
TYS3
Mar 12 20:26:35 HOME kernel: Type: CD-ROM ANSI
SCSI revision: 02
Mar 12 20:26:35 HOME kernel: IA-32 Microcode Update Driver: v1.11 <[EMAIL
PROTECTED]>
Mar 12 20:26:36 HOME kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Mar 12 20:26:36 HOME kernel: ip_tables: (C) 2000-2002 Netfilter core team
Mar 12 20:26:36 HOME kernel: PCI: Found IRQ 11 for device 00:0a.0
Mar 12 20:26:36 HOME kernel: PCI: Sharing IRQ 11 with 00:10.1
Mar 12 20:26:36 HOME kernel: ttySHSF0 at I/O 0xc000 (irq = 11) is a Conexant
HSF softmodem (PCI-14f1:2f00-14f1:2002)
Mar 12 20:26:36 HOME kernel: PCI: Found IRQ 5 for device 00:0c.0
Mar 12 20:26:36 HOME kernel: PCI: Sharing IRQ 5 with 00:10.3
Mar 12 20:26:36 HOME kernel: ttySHSF1 at I/O 0xc800 (irq = 5) is a Conexant HSF
softmodem (PCI-14f1:2f00-14f1:2004)
Mar 12 20:26:36 HOME kernel: usb.c: registered new driver hsfusbcd2
Mar 12 20:26:36 HOME kernel: via-rhine.c:v1.10-LK1.1.17 March-1-2003 Written
by Donald Becker
Mar 12 20:26:36 HOME kernel: http://www.scyld.com/network/via-rhine.html
Mar 12 20:26:36 HOME kernel: PCI: Found IRQ 11 for device 00:12.0
Mar 12 20:26:37 HOME kernel: PCI: Sharing IRQ 11 with 00:0d.0
Mar 12 20:26:37 HOME kernel: PCI: Sharing IRQ 11 with 00:10.0
Mar 12 20:26:37 HOME kernel: eth0: VIA VT6102 Rhine-II at 0xe400,
00:50:70:c4:10:77, IRQ 11.
Mar 12 20:26:37 HOME kernel: eth0: MII PHY found at address 1, status 0x7849
advertising 05e1 Link 0000.
Mar 12 20:26:37 HOME kernel: ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
Mar 12 20:26:37 HOME kernel: http://www.scyld.com/network/ne2k-pci.html
Mar 12 20:26:37 HOME kernel: PCI: Found IRQ 12 for device 00:0b.0
Mar 12 20:26:37 HOME kernel: PCI: Sharing IRQ 12 with 00:10.2
Mar 12 20:26:37 HOME kernel: PCI: Sharing IRQ 12 with 00:11.5
Mar 12 20:26:38 HOME kernel: eth1: RealTek RTL-8029 found at 0xc400, IRQ 12,
52:54:AB:3E:DC:78.
Mar 12 20:26:39 HOME xinetd[816]: xinetd Version 2.3.7 started with libwrap
options compiled in.
Mar 12 20:26:39 HOME xinetd[816]: Started working: 1 available service
Mar 12 20:26:40 HOME sendmail: sendmail startup succeeded
Mar 12 20:26:40 HOME sendmail: sm-client startup succeeded
Mar 12 20:26:40 HOME gpm[858]: oops() invoked from gpm.c(978)
Mar 12 20:26:40 HOME gpm[858]: /dev/mouse: No such file or directory
Mar 12 20:26:40 HOME gpm: gpm startup succeeded
Mar 12 20:26:41 HOME crond: crond startup succeeded
Mar 12 20:26:42 HOME xfs: xfs startup failed
Mar 12 20:26:42 HOME anacron: anacron startup succeeded
Mar 12 20:26:42 HOME atd: atd startup succeeded
Mar 12 20:26:42 HOME wine: Registering binary handler for Windows applications
Mar 12 20:26:42 HOME rc: Starting wine: succeeded
Mar 12 20:26:49 HOME login(pam_unix)[916]: session opened for user root by
LOGIN(uid=0)
Mar 12 20:26:49 HOME -- root[916]: ROOT LOGIN ON tty1
