Hi, Googled around and found a guy with similar problems. Via USB 2.0 controller, with ehci-hcd hung with 2.6 though..... He had recently upgraded his BIOS, started after that......
Any similarities???? prolly something for someone more experienced to talk bout.. Joy On 8/28/05, Peter H. <[EMAIL PROTECTED]> wrote: > Hi, > > Recently I tried to boot PuppyLinux from a CD and it would hang when this line > on the console showed: > > ehci_hcd 00:10.3: Via Technologies, Inc USB 2.0 > > Then in slackware 10.1 kernel 2.4.29 I activated EHCI HCD support putting it > to yes in USB Support. > > When rebooting slackware from the HD the system then hang at exactly the same > line. > > I then rebooted from the slackware CD and put the old kernel configuration > back w/o EHCI HCD support. > > My motherboard has USB 2.0 support including EHCI Host Controller core for > high speed signaling. > > What could be the cause for this hang on booting when EHCI is activated? > > Thanks & regrds > -- > Peter > > - > To unsubscribe from this list: send the line "unsubscribe linux-newbie" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.linux-learn.org/faqs > -- <ed__> riel: if it were a vax, gcc would probably be an opcode - excerpt from #kernelnewbies - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
