Weizhong wrote:
>
> hi,
>
> I am trying to setup ppp connection with BellSouth ISP. It is assumed using
> PAP. Here is the error log I got:
>
> Jul 29 08:34:07 rg chat[2347]: ATDT5555555^M^M
> Jul 29 08:34:07 rg chat[2347]: CONNECT
> Jul 29 08:34:07 rg chat[2347]: -- got it
> Jul 29 08:34:07 rg chat[2347]: send (^M)
> Jul 29 08:34:07 rg chat[2347]: timeout set to 5 seconds
> Jul 29 08:34:07 rg chat[2347]: expect (~)
> Jul 29 08:34:07 rg chat[2347]: 52000/ARQ/V90/LAPM/V42BIS^M
> Jul 29 08:34:12 rg chat[2347]: alarm
connection timed out. Increase timeout. 10 sec work for me. 60 sec for
wait for 'connect'
> Jul 29 08:34:12 rg chat[2347]: send (^M)
> Jul 29 08:34:12 rg pppd[2345]: Serial connection established.
> Jul 29 08:34:12 rg pppd[2345]: Using interface ppp0
> Jul 29 08:34:12 rg pppd[2345]: Connect: ppp0 <--> /dev/modem
> Jul 29 08:34:13 rg pppd[2345]: sent [LCP ConfReq id=0x1 <magic 0xa6984c04>
> <pcomp> <accomp>]
> Jul 29 08:34:40 rg last message repeated 9 times
> Jul 29 08:34:43 rg pppd[2345]: LCP: timeout sending Config-Requests
> Jul 29 08:34:43 rg pppd[2345]: Connection terminated.
> Jul 29 08:34:43 rg pppd[2345]: Receive serial link is not 8-bit clean:
> Jul 29 08:34:43 rg pppd[2345]: Problem: all had bit 7 set to 0
have you set asyncmap 0?
> Jul 29 08:34:44 rg pppd[2345]: Exit.
>
> configure tool: netconf. dist: Redhat6.0. pppd: 2.3.8 kernel: 2.2.9
>
> Please shed some light on it.
>
> thx,
>
> Weizhong
Marc
--
Marc Mutz <[EMAIL PROTECTED]> http://marc.mutz.com/
University of Bielefeld, Dep. of Mathematics / Dep. of Physics
PGP-keyID's: 0xd46ce9ab (RSA), 0x7ae55b9e (DSS/DH)
