On Thu, 10 Aug 2000, Steve Stuart wrote about, RF transmission problem: > I've just installed the ax-25 stuff, > node-0.3.0-1.i386.rpm, > libax25-0.0.7-1.i386.rpm > ax25-tools-0.0.5-1.i386.rpm > ax25-apps-0.0.4-1.i386.rpm > on RedHat 6.2 system (2.2.14-5.0) with a pentium 133 and 80M > ram. Recompiled/installed the kernal (and modules) with ham > radio stuff enabled. Then set up /etc/ax25/axports with the > line: "ax0 W8AN-4 9600 255 2 144.050 MHz (9600 baud)". Modprobe > mkiss successful. > Next "kissattach /dev/ttyS0 ax0 44.70.161.132" followed by > "/etc/rc.d/init.d/ax25d start". Even setup a couple routes to > local radio connections. "listen" commands shows activity on the > port. Everything looks great except my radio will not transmit. > If I try to ping a station I see the "STA" light flicker on the > AEA PK-96 tnc. No transmission. As far as i can see it should work, providing the serial line connection speed is actually 9600 baud as you have defined in /etc/ax25/axports. And that the TNC is actually in kiss mode. > > I can go into minicom and connect to stations ok when kiss is > not active on the tnc, so I know the hardware is hooked up > correctly. > > Anybody got a clue where I went wrong?? Thanx > > -- > 73 de Steve > ������`������`������`������`������`���� > [EMAIL PROTECTED] > http://www.qsl.net/w8an -- Regards Richard [EMAIL PROTECTED] http://people.zeelandnet.nl/pa3gcu/ - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.linux-learn.org/faqs
