Hello, As discussed at LSF/MM we'd like to present our work to enable copy offload support in NVMe fabrics RDMA targets. We'd appreciate some review and feedback from the community on our direction. This series is not intended to go upstream at this point.
The concept here is to use memory that's exposed on a PCI BAR as data buffers in the NVME target code such that data can be transferred from an RDMA NIC to the special memory and then directly to an NVMe device avoiding system memory entirely. The upside of this is better QoS for applications running on the CPU utilizing memory and lower PCI bandwidth required to the CPU (such that systems could be designed with fewer lanes connected to the CPU). However, presently, the trade-off is currently a reduction in overall throughput. (Largely due to hardware issues that would certainly improve in the future). Due to these trade-offs we've designed the system to only enable using the PCI memory in cases where the NIC, NVMe devices and memory are all behind the same PCI switch. This will mean many setups that could likely work well will not be supported so that we can be more confident it will work and not place any responsibility on the user to understand their topology. (We've chosen to go this route based on feedback we received at LSF). In order to enable this functionality we introduce a new p2pmem device which can be instantiated by PCI drivers. The device will register some PCI memory as ZONE_DEVICE and provide an genalloc based allocator for users of these devices to get buffers. We give an example of enabling p2p memory with the cxgb4 driver, however currently these devices have some hardware issues that prevent their use so we will likely be dropping this patch in the future. Ideally, we'd want to enable this functionality with NVME CMB buffers, however we don't have any hardware with this feature at this time. In nvmet-rdma, we attempt to get an appropriate p2pmem device at queue creation time and if a suitable one is found we will use it for all the (non-inlined) memory in the queue. An 'allow_p2pmem' configfs attribute is also created which is required to be set before any p2pmem is attempted. This patchset also includes a more controversial patch which provides an interface for userspace to obtain p2pmem buffers through an mmap call on a cdev. This enables userspace to fairly easily use p2pmem with RDMA and O_DIRECT interfaces. However, the user would be entirely responsible for knowing what their doing and inspecting sysfs to understand the pci topology and only using it in sane situations. Thanks, Logan Logan Gunthorpe (6): Introduce Peer-to-Peer memory (p2pmem) device nvmet: Use p2pmem in nvme target scatterlist: Modify SG copy functions to support io memory. nvmet: Be careful about using iomem accesses when dealing with p2pmem p2pmem: Support device removal p2pmem: Added char device user interface Steve Wise (2): cxgb4: setup pcie memory window 4 and create p2pmem region p2pmem: Add debugfs "stats" file drivers/memory/Kconfig | 5 + drivers/memory/Makefile | 2 + drivers/memory/p2pmem.c | 697 ++++++++++++++++++++++++ drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 3 + drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 97 +++- drivers/net/ethernet/chelsio/cxgb4/t4_regs.h | 5 + drivers/nvme/target/configfs.c | 31 ++ drivers/nvme/target/core.c | 18 +- drivers/nvme/target/fabrics-cmd.c | 28 +- drivers/nvme/target/nvmet.h | 2 + drivers/nvme/target/rdma.c | 183 +++++-- drivers/scsi/scsi_debug.c | 7 +- include/linux/p2pmem.h | 120 ++++ include/linux/scatterlist.h | 7 +- lib/scatterlist.c | 64 ++- 15 files changed, 1189 insertions(+), 80 deletions(-) create mode 100644 drivers/memory/p2pmem.c create mode 100644 include/linux/p2pmem.h -- 2.1.4 _______________________________________________ Linux-nvdimm mailing list Linux-nvdimm@lists.01.org https://lists.01.org/mailman/listinfo/linux-nvdimm