On 5/26/08, mohammed shareef <[EMAIL PROTECTED]> wrote:
> Dear All,
>
> i cross-compiled the tslib for my filesystem as mentioned in:
> http://linux.omap.com/pipermail/linux-omap-open-source/2005-March/003174.html
>
> and i have put the executables in the filesystem.
> when i do
> /usr/X11/bin/ts_calibrate
>
> i dont get any "calibration request" on the LCD.

when you run ts_calibrate what are the messages you are getting?

are you receiving the following?
  Couldnt load module input
if so, add a third exported variable:
  export TSLIB_PLUGINDIR=/lib/ts

> But when i do:
>
> cat /dev/input/event1
>
> i could see that i get stuff on my host computer when i touch the
> screen. which means that my toucscreen is associated with event1. i
> have even set up the proper environment variables.
>
> doing:
> cat /proc/interrupts
> also shows that spi interrupts incrementing on touching the screen.
>
> cat /proc/bus/input/devices
> I: Bus=0000 Vendor=0000 Product=0000 Version=0000
> N: Name="ADS784x Touchscreen"
> P: Phys=spi2.0/input0
> S: Sysfs=/class/input/input1
> H: Handlers=mouse0 event1 ts0
> B: EV=b
> B: KEY=400 0 0 0 0 0 0 0 0 0 0
> B: ABS=1000003
>
> but running
> ts_calibrate doesnt show any cross-hairs on the LCD.
>
> could you tell me if am missing something?
>
> thank you,
> warm regards,
> Shareef
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to