Added new register and bit definitions to enable Smartreflex driver integration.
Also PRM_VC_SMPS_SA bit definitions' naming was changed to match the naming of
other similar bit definitions.
Signed-off-by: Kalle Jokiniemi <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/prm-regbits-34xx.h | 27 ++++++--
arch/arm/mach-omap2/smartreflex.h | 124 ++++++++++++++++++++++++++++++-
include/asm-arm/arch-omap/control.h | 19 +++++
include/asm-arm/arch-omap/omap34xx.h | 2 +
4 files changed, 163 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h
b/arch/arm/mach-omap2/prm-regbits-34xx.h
index c6a7940..f82b5a7 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -435,10 +435,10 @@
/* PM_PWSTST_EMU specific bits */
/* PRM_VC_SMPS_SA */
-#define OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT 16
-#define OMAP3430_PRM_VC_SMPS_SA_SA1_MASK (0x7f << 16)
-#define OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT 0
-#define OMAP3430_PRM_VC_SMPS_SA_SA0_MASK (0x7f << 0)
+#define OMAP3430_SMPS_SA1_SHIFT 16
+#define OMAP3430_SMPS_SA1_MASK (0x7f << 16)
+#define OMAP3430_SMPS_SA0_SHIFT 0
+#define OMAP3430_SMPS_SA0_MASK (0x7f << 0)
/* PRM_VC_SMPS_VOL_RA */
#define OMAP3430_VOLRA1_SHIFT 16
@@ -452,7 +452,7 @@
#define OMAP3430_CMDRA0_SHIFT 0
#define OMAP3430_CMDRA0_MASK (0xff << 0)
-/* PRM_VC_CMD_VAL_0 specific bits */
+/* PRM_VC_CMD_VAL */
#define OMAP3430_VC_CMD_ON_SHIFT 24
#define OMAP3430_VC_CMD_ON_MASK (0xFF << 24)
#define OMAP3430_VC_CMD_ONLP_SHIFT 16
@@ -462,7 +462,17 @@
#define OMAP3430_VC_CMD_OFF_SHIFT 0
#define OMAP3430_VC_CMD_OFF_MASK (0xFF << 0)
+/* PRM_VC_CMD_VAL_0 specific bits */
+#define OMAP3430_VC_CMD_VAL0_ON (0x3 << 4)
+#define OMAP3430_VC_CMD_VAL0_ONLP (0x3 << 3)
+#define OMAP3430_VC_CMD_VAL0_RET (0x3 << 3)
+#define OMAP3430_VC_CMD_VAL0_OFF (0x3 << 3)
+
/* PRM_VC_CMD_VAL_1 specific bits */
+#define OMAP3430_VC_CMD_VAL1_ON (0xB << 2)
+#define OMAP3430_VC_CMD_VAL1_ONLP (0x3 << 3)
+#define OMAP3430_VC_CMD_VAL1_RET (0x3 << 3)
+#define OMAP3430_VC_CMD_VAL1_OFF (0x3 << 3)
/* PRM_VC_CH_CONF */
#define OMAP3430_CMD1 (1 << 20)
@@ -521,6 +531,13 @@
#define OMAP3430_AUTO_RET (1 << 1)
#define OMAP3430_AUTO_SLEEP (1 << 0)
+/* Constants to define setup durations */
+#define OMAP3430_CLKSETUP_DURATION 0xff
+#define OMAP3430_VOLTSETUP_TIME2 0xfff
+#define OMAP3430_VOLTSETUP_TIME1 0xfff
+#define OMAP3430_VOLTOFFSET_DURATION 0xff
+#define OMAP3430_VOLTSETUP2_DURATION 0xff
+
/* PRM_SRAM_PCHARGE */
#define OMAP3430_PCHARGE_TIME_SHIFT 0
#define OMAP3430_PCHARGE_TIME_MASK (0xff << 0)
diff --git a/arch/arm/mach-omap2/smartreflex.h
b/arch/arm/mach-omap2/smartreflex.h
index 62907ef..2091a15 100644
--- a/arch/arm/mach-omap2/smartreflex.h
+++ b/arch/arm/mach-omap2/smartreflex.h
@@ -1,5 +1,10 @@
+#ifndef __ARCH_ARM_MACH_OMAP3_SMARTREFLEX_H
+#define __ARCH_ARM_MACH_OMAP3_SMARTREFLEX_H
/*
- * linux/arch/arm/mach-omap3/smartreflex.h
+ * linux/arch/arm/mach-omap2/smartreflex.h
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
*
* Copyright (C) 2007 Texas Instruments, Inc.
* Lesly A M <[EMAIL PROTECTED]>
@@ -9,6 +14,21 @@
* published by the Free Software Foundation.
*/
+#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
+#define PHY_TO_OFF_PM_RECIEVER(p) (p - 0x5b)
+#define PHY_TO_OFF_PM_INT(p) (p - 0x2e)
+
+/* SMART REFLEX REG ADDRESS OFFSET */
+#define SRCONFIG 0x00
+#define SRSTATUS 0x04
+#define SENVAL 0x08
+#define SENMIN 0x0C
+#define SENMAX 0x10
+#define SENAVG 0x14
+#define AVGWEIGHT 0x18
+#define NVALUERECIPROCAL 0x1C
+#define SENERROR 0x20
+#define ERRCONFIG 0x24
/* SR Modules */
#define SR1 1
@@ -127,10 +147,106 @@
#define SR2_ERRMAXLIMIT (0x02 << 8)
#define SR2_ERRMINLIMIT (0xF9 << 0)
+/* T2 SMART REFLEX */
+#define R_SRI2C_SLAVE_ADDR 0x12
+#define R_VDD1_SR_CONTROL 0x00
+#define R_VDD2_SR_CONTROL 0x01
+#define T2_SMPS_UPDATE_DELAY 360 /* In uSec */
+
+/* Vmode control */
+#define R_DCDC_GLOBAL_CFG PHY_TO_OFF_PM_RECIEVER(0x61)
+
+#define R_VDD1_VSEL PHY_TO_OFF_PM_RECIEVER(0xb9)
+#define R_VDD1_VMODE_CFG PHY_TO_OFF_PM_RECIEVER(0xba)
+#define R_VDD1_VFLOOR PHY_TO_OFF_PM_RECIEVER(0xbb)
+#define R_VDD1_VROOF PHY_TO_OFF_PM_RECIEVER(0xbc)
+#define R_VDD1_STEP PHY_TO_OFF_PM_RECIEVER(0xbd)
+
+#define R_VDD2_VSEL PHY_TO_OFF_PM_RECIEVER(0xc7)
+#define R_VDD2_VMODE_CFG PHY_TO_OFF_PM_RECIEVER(0xc8)
+#define R_VDD2_VFLOOR PHY_TO_OFF_PM_RECIEVER(0xc9)
+#define R_VDD2_VROOF PHY_TO_OFF_PM_RECIEVER(0xca)
+#define R_VDD2_STEP PHY_TO_OFF_PM_RECIEVER(0xcb)
+
+/* R_DCDC_GLOBAL_CFG register, SMARTREFLEX_ENABLE valuws */
+#define DCDC_GLOBAL_CFG_ENABLE_SRFLX 0x08
+
+/* VDDs*/
+#define PRCM_VDD1 1
+#define PRCM_VDD2 2
+#define PRCM_MAX_SYSC_REGS 30
+
+/* XXX: These should be removed/moved from here once we have a working DVFS
+ implementation in place */
+#define AT_3430 1 /*3430 ES 1.0 */
+#define AT_3430_ES2 2 /*3430 ES 2.0 */
+
+#define ID_OPP 0xE2 /*OPP*/
+
+/* DEVICE ID/DPLL ID/CLOCK ID: bits 28-31 for OMAP type */
+#define OMAP_TYPE_SHIFT 28
+#define OMAP_TYPE_MASK 0xF
+/* OPP ID: bits: 0-4 for OPP number */
+#define OPP_NO_POS 0
+#define OPP_NO_MASK 0x1F
+/* OPP ID: bits: 5-6 for VDD */
+#define VDD_NO_POS 5
+#define VDD_NO_MASK 0x3
+/* Other IDs: bits 20-27 for ID type */
+/* These IDs have bits 25,26,27 as 1 */
+#define OTHER_ID_TYPE_SHIFT 20
+#define OTHER_ID_TYPE_MASK 0xFF
+
+#define OTHER_ID_TYPE(X) ((X & OTHER_ID_TYPE_MASK) << OTHER_ID_TYPE_SHIFT)
+#define ID_OPP_NO(X) ((X & OPP_NO_MASK) << OPP_NO_POS)
+#define ID_VDD(X) ((X & VDD_NO_MASK) << VDD_NO_POS)
+#define OMAP(X) ((X >> OMAP_TYPE_SHIFT) & OMAP_TYPE_MASK)
+#define get_opp_no(X) ((X >> OPP_NO_POS) & OPP_NO_MASK)
+#define get_vdd(X) ((X >> VDD_NO_POS) & VDD_NO_MASK)
+
+/* VDD1 OPPs */
+#define PRCM_VDD1_OPP1 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+ ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x1))
+#define PRCM_VDD1_OPP2 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+ ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x2))
+#define PRCM_VDD1_OPP3 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+ ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x3))
+#define PRCM_VDD1_OPP4 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+ ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x4))
+#define PRCM_VDD1_OPP5 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+ ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x5))
+#define PRCM_NO_VDD1_OPPS 5
+
+
+/* VDD2 OPPs */
+#define PRCM_VDD2_OPP1 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+ ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x1))
+#define PRCM_VDD2_OPP2 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+ ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x2))
+#define PRCM_VDD2_OPP3 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+ ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x3))
+#define PRCM_NO_VDD2_OPPS 3
+/* XXX: end remove/move */
+
+
+/* XXX: find more appropriate place for these once DVFS is in place */
extern u32 current_vdd1_opp;
extern u32 current_vdd2_opp;
-extern struct kset power_subsys;
-extern inline int loop_wait(u32 *lcnt, u32 *rcnt, u32 delay);
-extern void omap_udelay(u32 udelay);
+/*
+ * Smartreflex module enable/disable interface.
+ * NOTE: if smartreflex is not enabled from sysfs, these functions will not
+ * do anything.
+ */
+#if defined(CONFIG_ARCH_OMAP34XX) && defined(CONFIG_TWL4030_CORE)
+void enable_smartreflex(int srid);
+void disable_smartreflex(int srid);
+#else
+static inline void enable_smartreflex(int srid) {}
+static inline void disable_smartreflex(int srid) {}
+#endif
+
+
+#endif
+
diff --git a/include/asm-arm/arch-omap/control.h
b/include/asm-arm/arch-omap/control.h
index 12bc22a..6e64fe7 100644
--- a/include/asm-arm/arch-omap/control.h
+++ b/include/asm-arm/arch-omap/control.h
@@ -138,6 +138,15 @@
#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4)
#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8)
#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_FUSE_OPP1_VDD1 (OMAP2_CONTROL_GENERAL + 0x0110)
+#define OMAP343X_CONTROL_FUSE_OPP2_VDD1 (OMAP2_CONTROL_GENERAL + 0x0114)
+#define OMAP343X_CONTROL_FUSE_OPP3_VDD1 (OMAP2_CONTROL_GENERAL + 0x0118)
+#define OMAP343X_CONTROL_FUSE_OPP4_VDD1 (OMAP2_CONTROL_GENERAL + 0x011c)
+#define OMAP343X_CONTROL_FUSE_OPP5_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120)
+#define OMAP343X_CONTROL_FUSE_OPP1_VDD2 (OMAP2_CONTROL_GENERAL + 0x0124)
+#define OMAP343X_CONTROL_FUSE_OPP2_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128)
+#define OMAP343X_CONTROL_FUSE_OPP3_VDD2 (OMAP2_CONTROL_GENERAL + 0x012c)
+#define OMAP343X_CONTROL_FUSE_SR (OMAP2_CONTROL_GENERAL + 0x0130)
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4)
@@ -172,6 +181,16 @@
#define OMAP2_SYSBOOT_1_MASK (1 << 1)
#define OMAP2_SYSBOOT_0_MASK (1 << 0)
+/* CONTROL_FUSE_SR bits */
+#define OMAP343X_SR2_SENNENABLE_MASK (0x3 << 10)
+#define OMAP343X_SR2_SENNENABLE_SHIFT 10
+#define OMAP343X_SR2_SENPENABLE_MASK (0x3 << 8)
+#define OMAP343X_SR2_SENPENABLE_SHIFT 8
+#define OMAP343X_SR1_SENNENABLE_MASK (0x3 << 2)
+#define OMAP343X_SR1_SENNENABLE_SHIFT 2
+#define OMAP343X_SR1_SENPENABLE_MASK (0x3 << 0)
+#define OMAP343X_SR1_SENPENABLE_SHIFT 0
+
#ifndef __ASSEMBLY__
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
extern void __iomem *omap_ctrl_base_get(void);
diff --git a/include/asm-arm/arch-omap/omap34xx.h
b/include/asm-arm/arch-omap/omap34xx.h
index 6a0459a..3667fd6 100644
--- a/include/asm-arm/arch-omap/omap34xx.h
+++ b/include/asm-arm/arch-omap/omap34xx.h
@@ -54,6 +54,8 @@
#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000)
#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
#define IRQ_SIR_IRQ 0x0040
+#define OMAP34XX_SR1_BASE 0x480C9000
+#define OMAP34XX_SR2_BASE 0x480CB000
#if defined(CONFIG_ARCH_OMAP3430)
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
