> -----Original Message----- > From: Tony Lindgren [mailto:[EMAIL PROTECTED] > Sent: Monday, June 23, 2008 6:17 PM > To: Purushotam Kumar > Cc: linux-omap@vger.kernel.org; Gole, Anant > Subject: Re: [PATCH] OMAP3:devices.c: Enabling 4-bit for SD card > > * Purushotam Kumar <[EMAIL PROTECTED]> [080616 16:03]: > > OMAP3:devices.c:Enabling 4-bit for SD card > > > > SD card was working in 1-bit mode.This patch will configure SD card in > > 4-bit mode and hence performance will increase. > > > > Signed-off-by: Purushotam Kumar <[EMAIL PROTECTED]> > > Acked-by: Madhusudhan Chikkature Rajashekar <[EMAIL PROTECTED]> > > --- > > arch/arm/plat-omap/devices.c | 4 +++- > > 1 file changed, 3 insertions(+), 1 deletion(-) > > > > Index: linux-omap-2.6/arch/arm/plat-omap/devices.c > > =================================================================== > > --- linux-omap-2.6.orig/arch/arm/plat-omap/devices.c > > +++ linux-omap-2.6/arch/arm/plat-omap/devices.c > > @@ -292,8 +292,10 @@ static void __init omap_init_mmc(void) > > mmc = &mmc_conf->mmc[0]; > > > > if (cpu_is_omap2430() || cpu_is_omap34xx()) { > > - if (mmc->enabled) > > + if (mmc->enabled) { > > + mmc1_data.conf = *mmc; > > (void) platform_device_register(&mmc_omap_device1); > > + } > > > > #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) > > mmc = &mmc_conf->mmc[1]; > > I guess this should be also done for mmc2_data.conf? > > Tony
I agree with you that it is required to be done for MMC2 as well. Please push this patch for MMC1 and I will submit other patch latter for MMC2. Regards, Purushotam -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
