The following patch fixes some problems in T2 keypad
driver.
Basically we're passing irq number via platform_data,
moving globals to a structure and fixing a problem
while iterating over the keymap.
It might be that we still have a few locking issues
that might be solved on a later version of this same
patch.
For now, consider this one RFC.
Comments are welcome.
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/board-2430sdp.c | 5 +-
arch/arm/mach-omap2/board-3430sdp.c | 5 +-
drivers/input/keyboard/omap-twl4030keypad.c | 206 ++++++++++++++++-----------
include/asm-arm/arch-omap/keypad.h | 1 +
4 files changed, 130 insertions(+), 87 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c
b/arch/arm/mach-omap2/board-2430sdp.c
index 780913e..b54a7f0 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -176,9 +176,10 @@ static int sdp2430_keymap[] = {
static struct omap_kp_platform_data sdp2430_kp_data = {
.rows = 5,
.cols = 6,
- .keymap = sdp2430_keymap,
- .keymapsize = ARRAY_SIZE(sdp2430_keymap),
+ .keymap = sdp2430_keymap,
+ .keymapsize = ARRAY_SIZE(sdp2430_keymap),
.rep = 1,
+ .irq = TWL4030_MODIRQ_KEYPAD,
};
static struct platform_device sdp2430_kp_device = {
diff --git a/arch/arm/mach-omap2/board-3430sdp.c
b/arch/arm/mach-omap2/board-3430sdp.c
index 7a216cc..beefae8 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -107,9 +107,10 @@ static int sdp3430_keymap[] = {
static struct omap_kp_platform_data sdp3430_kp_data = {
.rows = 5,
.cols = 6,
- .keymap = sdp3430_keymap,
- .keymapsize = ARRAY_SIZE(sdp3430_keymap),
+ .keymap = sdp3430_keymap,
+ .keymapsize = ARRAY_SIZE(sdp3430_keymap),
.rep = 1,
+ .irq = TWL4030_MODIRQ_KEYPAD,
};
static struct platform_device sdp3430_kp_device = {
diff --git a/drivers/input/keyboard/omap-twl4030keypad.c
b/drivers/input/keyboard/omap-twl4030keypad.c
index 20aeb3c..c60455e 100644
--- a/drivers/input/keyboard/omap-twl4030keypad.c
+++ b/drivers/input/keyboard/omap-twl4030keypad.c
@@ -31,6 +31,7 @@
#include <linux/types.h>
#include <linux/input.h>
#include <linux/kernel.h>
+#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/platform_device.h>
@@ -47,52 +48,65 @@
#define KEYNUM_MASK 0x00FFFFFF
/* Global variables */
-static int *keymap;
-static u16 kp_state[MAX_ROWS];
-static int n_rows, n_cols;
-static struct device *dbg_dev;
-static struct input_dev *omap_twl4030kp;
+struct omap_keypad {
+ int *keymap;
+ unsigned int keymapsize;
+ u16 kp_state[MAX_ROWS];
+ int n_rows;
+ int n_cols;
+ int irq;
-static int twl4030_kpread(u32 module, u8 *data, u32 reg, u8 num_bytes)
+ struct device *dbg_dev;
+ struct input_dev *omap_twl4030kp;
+
+ /* sync read/write */
+ struct mutex mutex;
+};
+
+static int twl4030_kpread(struct omap_keypad *kp,
+ u32 module, u8 *data, u32 reg, u8 num_bytes)
{
int ret;
ret = twl4030_i2c_read(module, data, reg, num_bytes);
if (ret < 0) {
- dev_warn(dbg_dev, "Couldn't read TWL4030: %X - ret %d[%x]\n",
+ dev_warn(kp->dbg_dev,
+ "Couldn't read TWL4030: %X - ret %d[%x]\n",
reg, ret, ret);
return ret;
}
return ret;
}
-static int twl4030_kpwrite_u8(u32 module, u8 data, u32 reg)
+static int twl4030_kpwrite_u8(struct omap_keypad *kp,
+ u32 module, u8 data, u32 reg)
{
int ret;
ret = twl4030_i2c_write_u8(module, data, reg);
if (ret < 0) {
- dev_warn(dbg_dev, "Could not write TWL4030: %X - ret %d[%x]\n",
+ dev_warn(kp->dbg_dev,
+ "Could not write TWL4030: %X - ret %d[%x]\n",
reg, ret, ret);
return ret;
}
return ret;
}
-static int omap_kp_find_key(int col, int row)
+static int omap_kp_find_key(struct omap_keypad *kp, int col, int row)
{
int i, rc;
rc = KEY(col, row, 0);
- for (i = 0; keymap[i] != 0; i++)
- if ((keymap[i] & ROWCOL_MASK) == rc)
- return keymap[i] & KEYNUM_MASK;
+ for (i = 0; i < kp->keymapsize; i++)
+ if ((kp->keymap[i] & ROWCOL_MASK) == rc)
+ return kp->keymap[i] & KEYNUM_MASK;
return -EINVAL;
}
-static inline u16 omap_kp_col_xlate(u8 col)
+static inline u16 omap_kp_col_xlate(struct omap_keypad *kp, u8 col)
{
/* If all bits in a row are active for all coloumns then
* we have that row line connected to gnd. Mark this
@@ -100,30 +114,30 @@ static inline u16 omap_kp_col_xlate(u8 col)
* one higher than the size of the matrix).
*/
if (col == 0xFF)
- return (1 << n_cols);
+ return 1 << kp->n_cols;
else
- return col & ((1 << n_cols) - 1);
+ return col & ((1 << kp->n_cols) - 1);
}
-static int omap_kp_read_kp_matrix_state(u16 *state)
+static int omap_kp_read_kp_matrix_state(struct omap_keypad *kp, u16 *state)
{
u8 new_state[MAX_ROWS];
int row;
- int ret = twl4030_kpread(TWL4030_MODULE_KEYPAD,
- new_state, KEYP_FULL_CODE_7_0, n_rows);
+ int ret = twl4030_kpread(kp, TWL4030_MODULE_KEYPAD,
+ new_state, KEYP_FULL_CODE_7_0, kp->n_rows);
if (ret >= 0) {
- for (row = 0; row < n_rows; row++)
- state[row] = omap_kp_col_xlate(new_state[row]);
+ for (row = 0; row < kp->n_rows; row++)
+ state[row] = omap_kp_col_xlate(kp, new_state[row]);
}
return ret;
}
-static int omap_kp_is_in_ghost_state(u16 *key_state)
+static int omap_kp_is_in_ghost_state(struct omap_keypad *kp, u16 *key_state)
{
int i;
u16 check = 0;
- for (i = 0; i < n_rows; i++) {
+ for (i = 0; i < kp->n_rows; i++) {
u16 col = key_state[i];
if ((col & check) && hweight16(col) > 1)
@@ -134,7 +148,7 @@ static int omap_kp_is_in_ghost_state(u16 *key_state)
return 0;
}
-static void twl4030_kp_scan(int release_all)
+static void twl4030_kp_scan(struct omap_keypad *kp, int release_all)
{
u16 new_state[MAX_ROWS];
int col, row;
@@ -143,60 +157,66 @@ static void twl4030_kp_scan(int release_all)
memset(new_state, 0, sizeof(new_state));
else {
/* check for any changes */
- int ret = omap_kp_read_kp_matrix_state(new_state);
+ int ret = omap_kp_read_kp_matrix_state(kp, new_state);
if (ret < 0) /* panic ... */
return;
- if (omap_kp_is_in_ghost_state(new_state))
+ if (omap_kp_is_in_ghost_state(kp, new_state))
return;
}
+ mutex_lock(&kp->mutex);
+
/* check for changes and print those */
- for (row = 0; row < n_rows; row++) {
- int changed = new_state[row] ^ kp_state[row];
+ for (row = 0; row < kp->n_rows; row++) {
+ int changed = new_state[row] ^ kp->kp_state[row];
if (!changed)
continue;
- for (col = 0; col < n_cols + 1; col++) {
+ for (col = 0; col < kp->n_cols + 1; col++) {
int key;
if (!(changed & (1 << col)))
continue;
- dev_dbg(dbg_dev, "key [%d:%d] %s\n", row, col,
+ dev_dbg(kp->dbg_dev, "key [%d:%d] %s\n", row, col,
(new_state[row] & (1 << col)) ?
"press" : "release");
- key = omap_kp_find_key(col, row);
+ key = omap_kp_find_key(kp, col, row);
if (key < 0)
- dev_warn(dbg_dev, "Spurious key event %d-%d\n",
+ dev_warn(kp->dbg_dev,
+ "Spurious key event %d-%d\n",
col, row);
else
- input_report_key(omap_twl4030kp, key,
+ input_report_key(kp->omap_twl4030kp, key,
new_state[row] & (1 << col));
}
- kp_state[row] = new_state[row];
+ kp->kp_state[row] = new_state[row];
}
+
+ mutex_unlock(&kp->mutex);
}
/*
* Keypad interrupt handler
*/
-static irqreturn_t do_kp_irq(int irq, void *dev_id)
+static irqreturn_t do_kp_irq(int irq, void *_kp)
{
+ struct omap_keypad *kp = _kp;
u8 reg;
int ret;
/* Read & Clear TWL4030 pending interrupt */
- ret = twl4030_kpread(TWL4030_MODULE_KEYPAD, ®, KEYP_ISR1, 1);
+ ret = twl4030_kpread(kp, TWL4030_MODULE_KEYPAD, ®, KEYP_ISR1, 1);
/* Release all keys if I2C has gone bad or
* the KEYP has gone to idle state */
if ((ret >= 0) && (reg & KEYP_IMR1_KP))
- twl4030_kp_scan(0);
+ twl4030_kp_scan(kp, 0);
else
- twl4030_kp_scan(1);
+ twl4030_kp_scan(kp, 1);
return IRQ_HANDLED;
}
@@ -210,92 +230,108 @@ static int __init omap_kp_probe(struct platform_device
*pdev)
u8 reg;
int i;
int ret = 0;
+ struct omap_keypad *kp;
struct omap_kp_platform_data *pdata = pdev->dev.platform_data;
- /* Get the debug Device */
- dbg_dev = &(pdev->dev);
+ kp = kzalloc(sizeof(*kp), GFP_KERNEL);
+ if (!kp)
+ return -ENOMEM;
if (!pdata->rows || !pdata->cols || !pdata->keymap) {
- dev_err(dbg_dev, "No rows, cols or keymap from pdata\n");
+ dev_err(kp->dbg_dev, "No rows, cols or keymap from pdata\n");
+ kfree(kp);
return -EINVAL;
}
- omap_twl4030kp = input_allocate_device();
- if (omap_twl4030kp == NULL)
+ dev_set_drvdata(&pdev->dev, kp);
+
+ /* Get the debug Device */
+ kp->dbg_dev = &pdev->dev;
+
+ kp->omap_twl4030kp = input_allocate_device();
+ if (!kp->omap_twl4030kp) {
+ kfree(kp);
return -ENOMEM;
+ }
+
+ mutex_init(&kp->mutex);
- keymap = pdata->keymap;
- n_rows = pdata->rows;
- n_cols = pdata->cols;
+ kp->keymap = pdata->keymap;
+ kp->keymapsize = pdata->keymapsize;
+ kp->n_rows = pdata->rows;
+ kp->n_cols = pdata->cols;
+ kp->irq = pdata->irq;
/* setup input device */
- set_bit(EV_KEY, omap_twl4030kp->evbit);
+ set_bit(EV_KEY, kp->omap_twl4030kp->evbit);
/* Enable auto repeat feature of Linux input subsystem */
if (pdata->rep)
- set_bit(EV_REP, omap_twl4030kp->evbit);
+ set_bit(EV_REP, kp->omap_twl4030kp->evbit);
- for (i = 0; keymap[i] != 0; i++)
- set_bit(keymap[i] & KEYNUM_MASK, omap_twl4030kp->keybit);
+ for (i = 0; i < kp->keymapsize; i++)
+ set_bit(kp->keymap[i] & KEYNUM_MASK,
+ kp->omap_twl4030kp->keybit);
- omap_twl4030kp->name = "omap_twl4030keypad";
- omap_twl4030kp->phys = "omap_twl4030keypad/input0";
- omap_twl4030kp->dev.parent = &pdev->dev;
+ kp->omap_twl4030kp->name = "omap_twl4030keypad";
+ kp->omap_twl4030kp->phys = "omap_twl4030keypad/input0";
+ kp->omap_twl4030kp->dev.parent = &pdev->dev;
- omap_twl4030kp->id.bustype = BUS_HOST;
- omap_twl4030kp->id.vendor = 0x0001;
- omap_twl4030kp->id.product = 0x0001;
- omap_twl4030kp->id.version = 0x0003;
+ kp->omap_twl4030kp->id.bustype = BUS_HOST;
+ kp->omap_twl4030kp->id.vendor = 0x0001;
+ kp->omap_twl4030kp->id.product = 0x0001;
+ kp->omap_twl4030kp->id.version = 0x0003;
- omap_twl4030kp->keycode = keymap;
- omap_twl4030kp->keycodesize = sizeof(unsigned int);
- omap_twl4030kp->keycodemax = pdata->keymapsize;
+ kp->omap_twl4030kp->keycode = kp->keymap;
+ kp->omap_twl4030kp->keycodesize = sizeof(unsigned int);
+ kp->omap_twl4030kp->keycodemax = kp->keymapsize;
- ret = input_register_device(omap_twl4030kp);
+ ret = input_register_device(kp->omap_twl4030kp);
if (ret < 0) {
- dev_err(dbg_dev, "Unable to register twl4030 keypad device\n");
+ dev_err(kp->dbg_dev,
+ "Unable to register twl4030 keypad device\n");
goto err2;
}
/* Disable auto-repeat */
reg = KEYP_CTRL_NOAUTORPT;
- ret = twl4030_kpwrite_u8(TWL4030_MODULE_KEYPAD, reg, KEYP_CTRL);
+ ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD, reg, KEYP_CTRL);
if (ret < 0)
goto err3;
/* Enable TO rising and KP rising and falling edge detection */
reg = KEYP_EDR_KP_BOTH | KEYP_EDR_TO_RISING;
- ret = twl4030_kpwrite_u8(TWL4030_MODULE_KEYPAD, reg, KEYP_EDR);
+ ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD, reg, KEYP_EDR);
if (ret < 0)
goto err3;
/* Set PTV prescaler Field */
reg = (PTV_PRESCALER << KEYP_LK_PTV_PTV_SHIFT);
- ret = twl4030_kpwrite_u8(TWL4030_MODULE_KEYPAD, reg, KEYP_LK_PTV);
+ ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD, reg, KEYP_LK_PTV);
if (ret < 0)
goto err3;
/* Set key debounce time to 20 ms */
i = KEYP_PERIOD_US(20000, PTV_PRESCALER);
- ret = twl4030_kpwrite_u8(TWL4030_MODULE_KEYPAD, i, KEYP_DEB);
+ ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD, i, KEYP_DEB);
if (ret < 0)
goto err3;
/* Set timeout period to 100 ms */
i = KEYP_PERIOD_US(200000, PTV_PRESCALER);
- ret = twl4030_kpwrite_u8(TWL4030_MODULE_KEYPAD,
+ ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD,
(i & 0xFF), KEYP_TIMEOUT_L);
if (ret < 0)
goto err3;
- ret = twl4030_kpwrite_u8(TWL4030_MODULE_KEYPAD,
+ ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD,
(i >> 8), KEYP_TIMEOUT_H);
if (ret < 0)
goto err3;
/* Enable Clear-on-Read */
reg = KEYP_SIH_CTRL_COR | KEYP_SIH_CTRL_PEND_DIS;
- ret = twl4030_kpwrite_u8(TWL4030_MODULE_KEYPAD,
+ ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD,
reg, KEYP_SIH_CTRL);
if (ret < 0)
goto err3;
@@ -304,50 +340,54 @@ static int __init omap_kp_probe(struct platform_device
*pdev)
* This ISR will always execute in kernel thread context because of
* the need to access the TWL4030 over the I2C bus.
*/
- ret = request_irq(TWL4030_MODIRQ_KEYPAD, do_kp_irq,
- IRQF_DISABLED, "TWL4030 Keypad", omap_twl4030kp);
+ ret = request_irq(kp->irq, do_kp_irq, IRQF_DISABLED,
+ "TWL4030 Keypad", kp);
if (ret < 0) {
- dev_info(dbg_dev, "request_irq failed for irq no=%d\n",
- TWL4030_MODIRQ_KEYPAD);
+ dev_info(kp->dbg_dev, "request_irq failed for irq no=%d\n",
+ kp->irq);
goto err3;
} else {
/* Enable KP and TO interrupts now. */
reg = ~(KEYP_IMR1_KP | KEYP_IMR1_TO);
- ret = twl4030_kpwrite_u8(TWL4030_MODULE_KEYPAD,
+ ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD,
reg, KEYP_IMR1);
if (ret < 0)
goto err5;
}
- ret = omap_kp_read_kp_matrix_state(kp_state);
+ ret = omap_kp_read_kp_matrix_state(kp, kp->kp_state);
if (ret < 0)
goto err4;
return ret;
err5:
/* mask all events - we don't care about the result */
- (void) twl4030_kpwrite_u8(TWL4030_MODULE_KEYPAD, 0xff, KEYP_IMR1);
+ (void) twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD, 0xff, KEYP_IMR1);
err4:
- free_irq(TWL4030_MODIRQ_KEYPAD, NULL);
+ free_irq(kp->irq, NULL);
err3:
- input_unregister_device(omap_twl4030kp);
+ input_unregister_device(kp->omap_twl4030kp);
err2:
- input_free_device(omap_twl4030kp);
+ input_free_device(kp->omap_twl4030kp);
+
return -ENODEV;
}
static int omap_kp_remove(struct platform_device *pdev)
{
- free_irq(TWL4030_MODIRQ_KEYPAD, NULL);
+ struct omap_keypad *kp = dev_get_drvdata(&pdev->dev);
+
+ free_irq(kp->irq, kp);
+ input_unregister_device(kp->omap_twl4030kp);
+ kfree(kp);
- input_unregister_device(omap_twl4030kp);
return 0;
}
static struct platform_driver omap_kp_driver = {
.probe = omap_kp_probe,
- .remove = omap_kp_remove,
+ .remove = __devexit_p(omap_kp_remove),
.driver = {
.name = "omap_twl4030keypad",
.owner = THIS_MODULE,
@@ -369,7 +409,7 @@ static void __exit omap_kp_exit(void)
module_init(omap_kp_init);
module_exit(omap_kp_exit);
-MODULE_ALIAS("platform:omap_twl4030keypad");
+
MODULE_AUTHOR("Texas Instruments");
MODULE_DESCRIPTION("OMAP TWL4030 Keypad Driver");
MODULE_LICENSE("GPL");
diff --git a/include/asm-arm/arch-omap/keypad.h
b/include/asm-arm/arch-omap/keypad.h
index b7f8307..ac87f37 100644
--- a/include/asm-arm/arch-omap/keypad.h
+++ b/include/asm-arm/arch-omap/keypad.h
@@ -14,6 +14,7 @@ struct omap_kp_platform_data {
int rows;
int cols;
int *keymap;
+ int irq;
unsigned int keymapsize;
unsigned int rep:1;
unsigned long delay;
--
1.5.6.49.g112db
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
