On Mon, Sep 08, 2008 at 11:12:24AM +0800, Bryan Wu wrote: > On Sun, Sep 7, 2008 at 1:04 PM, David Brownell <[EMAIL PROTECTED]> wrote: > > On Thursday 04 September 2008, Gadiyar, Anand wrote: > >> From: Anand Gadiyar <[EMAIL PROTECTED]> > >> > >> The Index register needs to be zero to access CONFIGDATA. > >> musb_ep_select()will not set the MUSB_INDEX register unless INDEXED > >> mode addressing is used. This change will set the register correctly > >> in INDEXED as well as FLAT mode. > >> > >> Signed-off-by: Anand Gadiyar <[EMAIL PROTECTED]> > >> CC: Ajay Kumar Gupta <[EMAIL PROTECTED]> > > > > ACK. I *know* it was originally written that way. I think > > the change was one of the Blackfin patches ... I hope this > > isn't one of those cases where the Blackfin version of this > > core acts differently. (Like clearing that DMA IRQ status...) > > > > For Blackfin, the register MUSB_CONFIGDATA is not exported out to software. > So in the musb driver, Blackfin code can not access the MUSB_CONFIGDATA. > The configuration is fixed in the software.
What happens if you try to read/write to the register ? Does it screw up things somehow or just ignores ?? If it just ignores (and same for the other unexistent registers) we can drop that patch adding ifdefs to te register accesses otherwise we're gonna have to think about another solution to abstract that. -- balbi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
