omap_i2c_unidle() and omap_i2c_idle() are called recursively during
omap_i2c_probe().  This is evidently unexpected and will wipe
out the I2C interrupt enable register the second time that
omap_i2c_idle() is called consecutively.  Any I2C transactions
following a probe of a bus with at least one device on it will then
time out.

Fix by moving omap_i2c_idle() further up in omap_i2c_probe().  Ensure
the I2C controller is marked as idle before the probe starts.  Also
attempt to catch future reappearances of this bug early in development
by warning in omap_i2c_{un,}idle() when they are called recursively.

Problem reported by David Brownell <[EMAIL PROTECTED]>.

Tested on 3430SDP and 2430SDP.

Signed-off-by: Paul Walmsley <[EMAIL PROTECTED]>
Cc: David Brownell <[EMAIL PROTECTED]>
Cc: Richard Woodruff <[EMAIL PROTECTED]>

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 1e6c3fd..a999606 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -202,6 +202,8 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
 
 static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 {
+       WARN_ON(!dev->idle);
+
        if (dev->iclk != NULL)
                clk_enable(dev->iclk);
        clk_enable(dev->fclk);
@@ -214,6 +216,8 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
 {
        u16 iv;
 
+       WARN_ON(dev->idle);
+
        dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
        omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
        if (dev->rev1)
@@ -748,6 +752,7 @@ omap_i2c_probe(struct platform_device *pdev)
                *speed = 100; /* Defualt speed */
 
        dev->speed = *speed;
+       dev->idle = 1;
        dev->dev = &pdev->dev;
        dev->irq = irq->start;
        dev->base = ioremap(mem->start, mem->end - mem->start + 1);
@@ -797,6 +802,8 @@ omap_i2c_probe(struct platform_device *pdev)
        dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
                 pdev->id, r >> 4, r & 0xf, dev->speed);
 
+       omap_i2c_idle(dev);
+
        adap = &dev->adapter;
        i2c_set_adapdata(adap, dev);
        adap->owner = THIS_MODULE;
@@ -813,8 +820,6 @@ omap_i2c_probe(struct platform_device *pdev)
                goto err_free_irq;
        }
 
-       omap_i2c_idle(dev);
-
        return 0;
 
 err_free_irq:
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to