From: Jarkko Nikula <[EMAIL PROTECTED]>
If there is a signal pending and wait_for_completion_interruptible_timeout
terminates with -ERESTARTSYS, we return and disable the i2c clocks in
omap_i2c_xfer.
If we terminate before sending last i2c message with a stop condition, the
bus remains busy and we are not able to send new messages into bus with
successive omap_i2c_xfer calls. Therefore a pending signal is not caught
here and we return only because of timeout or i2c error.
Signed-off-by: Jarkko Nikula <[EMAIL PROTECTED]>
Signed-off-by: Juha Yrjola <[EMAIL PROTECTED]>
Signed-off-by: Tony Lindgren <[EMAIL PROTECTED]>
---
drivers/i2c/busses/i2c-omap.c | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 608038d..17476ec 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -328,8 +328,12 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
w |= OMAP_I2C_CON_STP;
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
- r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
- OMAP_I2C_TIMEOUT);
+ /*
+ * REVISIT: We should abort the transfer on signals, but the bus goes
+ * into arbitration and we're currently unable to recover from it.
+ */
+ r = wait_for_completion_timeout(&dev->cmd_complete,
+ OMAP_I2C_TIMEOUT);
dev->buf_len = 0;
if (r < 0)
return r;
--
1.5.6.rc3.21.g8c6b5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
