On Wednesday 05 November 2008, Tony Lindgren wrote:
> OK, I've pushed the hsmmc init patches. They still need work though.
>
> Please everybody check your board MMC configuration and send patches
> as needed.
See the appended build fixes ... :)
Also, I suspect there needs to be an MMC_CAP_8_BIT_DATA at
some point, with hsmmc driver support.
> Also the write protect interrupts are not handled, and gpio handling
> is twl specific. Hopefully a better base for the code anyways.
I'll have a look at write protect ... it wouldn't normally
be an IRQ, just an input GPIO. Unlike the CD, which gets
used for both purposes; that code looks iffy too.
Yes, a better base.
- Dave
========= CUT HERE
From: David Brownell <[EMAIL PROTECTED]>
Build fixes for "HSMMC: Improve the interface for hsmmc_init()".
The header file needs to work without MMC support enabled, and
some board files needed to include it.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/board-2430sdp.c | 3 +++
arch/arm/mach-omap2/board-ldp.c | 3 +++
arch/arm/mach-omap2/board-omap2evm.c | 3 +++
arch/arm/mach-omap2/board-omap3beagle.c | 2 ++
arch/arm/mach-omap2/board-omap3evm.c | 2 ++
arch/arm/mach-omap2/board-omap3pandora.c | 2 ++
arch/arm/mach-omap2/mmc-twl4030.h | 8 ++++----
7 files changed, 19 insertions(+), 4 deletions(-)
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -44,6 +44,9 @@
#include <asm/io.h>
+#include "mmc-twl4030.h"
+
+
#define SDP2430_FLASH_CS 0
#define SDP2430_SMC91X_CS 5
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -41,6 +41,9 @@
#include <asm/delay.h>
#include <mach/control.h>
+#include "mmc-twl4030.h"
+
+
#define CONFIG_DISABLE_HFCLK 1
#define ENABLE_VAUX1_DEDICATED 0x03
--- a/arch/arm/mach-omap2/board-omap2evm.c
+++ b/arch/arm/mach-omap2/board-omap2evm.c
@@ -41,6 +41,9 @@
#include <mach/mcspi.h>
#include <mach/mux.h>
+#include "mmc-twl4030.h"
+
+
#define GPMC_OFF_CONFIG1_0 0x60
static struct mtd_partition omap2evm_nand_partitions[] = {
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -44,6 +44,8 @@
#include <mach/mux.h>
#include "twl4030-generic-scripts.h"
+#include "mmc-twl4030.h"
+
#define GPMC_CS0_BASE 0x60
#define GPMC_CS_SIZE 0x30
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -40,6 +40,8 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "twl4030-generic-scripts.h"
+#include "mmc-twl4030.h"
+
static struct resource omap3evm_smc911x_resources[] = {
[0] = {
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -47,6 +47,8 @@
#include <mach/usb-musb.h>
#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
#define NAND_BLOCK_SIZE SZ_128K
#define GPMC_CS0_BASE 0x60
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -6,20 +6,20 @@
* published by the Free Software Foundation.
*/
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
- defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-
struct twl4030_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
u8 wires; /* 1/4/8 wires */
int gpio_cd; /* or -EINVAL */
};
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+
void hsmmc_init(struct twl4030_hsmmc_info *);
#else
-static inline void hsmmc_init(struct twl4030_hsmmc_info *)
+static inline void hsmmc_init(struct twl4030_hsmmc_info *info)
{
}
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
