The patch defines virtual nodes for VDD1 and VDD2
Signed-off-by: Rajendra Nayak <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/clock34xx.c | 197 +++++++++++++++++++++++++-----
arch/arm/mach-omap2/clock34xx.h | 25 +++
arch/arm/mach-omap2/io.c | 5
arch/arm/plat-omap/include/mach/omap-pm.h | 18 +-
arch/arm/plat-omap/omap-pm-noop.c | 20 +--
arch/arm/plat-omap/omap-pm-srf.c | 20 +--
6 files changed, 229 insertions(+), 56 deletions(-)
Index: linux-omap-2.6/arch/arm/mach-omap2/clock34xx.h
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/clock34xx.h 2008-11-10
15:24:50.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/clock34xx.h 2008-11-10
15:29:38.000000000 +0530
@@ -20,6 +20,7 @@
#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
#include <mach/control.h>
+#include <mach/omap-pm.h>
#include "clock.h"
#include "cm.h"
@@ -36,6 +37,9 @@ static int omap3_noncore_dpll_enable(str
static void omap3_noncore_dpll_disable(struct clk *clk);
static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
+static void omap3_table_recalc(struct clk *clk);
+static long omap3_round_to_table_rate(struct clk *clk, unsigned long rate);
+static int omap3_select_table_rate(struct clk *clk, unsigned long rate);
/* Maximum DPLL multiplier, divider values for OMAP3 */
#define OMAP3_MAX_DPLL_MULT 2048
@@ -3388,6 +3392,24 @@ static struct clk wdt1_fck = {
.recalc = &followparent_recalc,
};
+static struct clk virt_vdd1_prcm_set = {
+ .name = "virt_vdd1_prcm_set",
+ .flags = CLOCK_IN_OMAP343X | VIRTUAL_CLOCK | ALWAYS_ENABLED,
+ .parent = &mpu_ck, /* Indexed by mpu speed, no parent */
+ .recalc = &omap3_table_recalc, /*sets are keyed on mpu rate */
+ .set_rate = &omap3_select_table_rate,
+ .round_rate = &omap3_round_to_table_rate,
+};
+
+static struct clk virt_vdd2_prcm_set = {
+ .name = "virt_vdd2_prcm_set",
+ .flags = CLOCK_IN_OMAP343X | VIRTUAL_CLOCK | ALWAYS_ENABLED,
+ .parent = &core_ck,
+ .recalc = &omap3_table_recalc,
+ .set_rate = &omap3_select_table_rate,
+ .round_rate = &omap3_round_to_table_rate,
+};
+
static struct clk *onchip_34xx_clks[] __initdata = {
&omap_32k_fck,
&virt_12m_ck,
@@ -3610,6 +3632,9 @@ static struct clk *onchip_34xx_clks[] __
&secure_32k_fck,
&gpt12_fck,
&wdt1_fck,
+ /* virtual group clock */
+ &virt_vdd1_prcm_set,
+ &virt_vdd2_prcm_set,
};
#endif
Index: linux-omap-2.6/arch/arm/mach-omap2/clock34xx.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/clock34xx.c 2008-11-10
15:24:50.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/clock34xx.c 2008-11-10
15:29:38.000000000 +0530
@@ -25,6 +25,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/limits.h>
+#include <linux/err.h>
#include <mach/clock.h>
#include <mach/sram.h>
@@ -38,6 +39,7 @@
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm-regbits-34xx.h"
+#include "pm.h"
/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
#define DPLL_AUTOIDLE_DISABLE 0x0
@@ -45,6 +47,32 @@
#define MAX_DPLL_WAIT_TRIES 1000000
+struct omap_opp *curr_vdd1_prcm_set;
+struct omap_opp *curr_vdd2_prcm_set;
+static struct clk *dpll1_clk, *dpll2_clk, *dpll3_clk;
+
+#ifndef CONFIG_CPU_FREQ
+static unsigned long compute_lpj(unsigned long ref, u_int div, u_int mult)
+{
+ unsigned long new_jiffy_l, new_jiffy_h;
+
+ /*
+ * Recalculate loops_per_jiffy. We do it this way to
+ * avoid math overflow on 32-bit machines. Maybe we
+ * should make this architecture dependent? If you have
+ * a better way of doing this, please replace!
+ *
+ * new = old * mult / div
+ */
+ new_jiffy_h = ref / div;
+ new_jiffy_l = (ref % div) / 100;
+ new_jiffy_h *= mult;
+ new_jiffy_l = new_jiffy_l * mult / div;
+
+ return new_jiffy_h + new_jiffy_l * 100;
+}
+#endif
+
/**
* omap3_dpll_recalc - recalculate DPLL rate
* @clk: DPLL struct clk
@@ -666,12 +694,6 @@ static int __init omap2_clk_arch_init(vo
if (!mpurate)
return -EINVAL;
- /* REVISIT: not yet ready for 343x */
-#if 0
- if (omap2_select_table_rate(&virt_prcm_set, mpurate))
- printk(KERN_ERR "Could not find matching MPU rate\n");
-#endif
-
recalculate_root_clocks();
printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
@@ -689,6 +711,9 @@ int __init omap2_clk_init(void)
struct clk **clkp;
/* u32 clkrate; */
u32 cpu_clkflg;
+ unsigned long mpu_speed, core_speed;
+ struct omap_opp *prcm_vdd;
+
/* REVISIT: Ultimately this will be used for multiboot */
#if 0
@@ -727,26 +752,34 @@ int __init omap2_clk_init(void)
clkp++) {
if ((*clkp)->flags & cpu_clkflg) {
clk_register(*clkp);
- omap2_init_clk_clkdm(*clkp);
+ if (!((*clkp)->flags & VIRTUAL_CLOCK))
+ omap2_init_clk_clkdm(*clkp);
}
}
- /* REVISIT: Not yet ready for OMAP3 */
-#if 0
- /* Check the MPU rate set by bootloader */
- clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck.rate)
- continue;
- if (prcm->dpll_speed <= clkrate)
- break;
+ recalculate_root_clocks();
+
+ dpll1_clk = clk_get(NULL, "dpll1_ck");
+ dpll2_clk = clk_get(NULL, "dpll2_ck");
+ dpll3_clk = clk_get(NULL, "dpll3_m2_ck");
+
+ mpu_speed = dpll1_clk->rate;
+ prcm_vdd = mpu_opps + MAX_VDD1_OPP;
+ for (; prcm_vdd->rate; prcm_vdd--) {
+ if (prcm_vdd->rate <= mpu_speed) {
+ curr_vdd1_prcm_set = prcm_vdd;
+ break;
+ }
}
- curr_prcm_set = prcm;
-#endif
- recalculate_root_clocks();
+ core_speed = dpll3_clk->rate;
+ prcm_vdd = l3_opps + MAX_VDD2_OPP;
+ for (; prcm_vdd->rate; prcm_vdd--) {
+ if (prcm_vdd->rate <= core_speed) {
+ curr_vdd2_prcm_set = prcm_vdd;
+ break;
+ }
+ }
printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
"%ld.%01ld/%ld/%ld MHz\n",
@@ -759,13 +792,123 @@ int __init omap2_clk_init(void)
*/
clk_enable_init_clocks();
- /* Avoid sleeping during omap2_clk_prepare_for_reboot() */
- /* REVISIT: not yet ready for 343x */
-#if 0
- vclk = clk_get(NULL, "virt_prcm_set");
- sclk = clk_get(NULL, "sys_ck");
-#endif
return 0;
}
+unsigned long get_freq(struct omap_opp *opp_freq_table,
+ unsigned short opp)
+{
+ struct omap_opp *prcm_config;
+ prcm_config = opp_freq_table;
+
+ for (; prcm_config->opp_id; prcm_config--)
+ if (prcm_config->opp_id == opp)
+ return prcm_config->rate;
+ return 0;
+}
+
+unsigned short get_opp(struct omap_opp *opp_freq_table,
+ unsigned long freq)
+{
+ struct omap_opp *prcm_config;
+ prcm_config = opp_freq_table;
+
+ if (prcm_config->rate <= freq)
+ return prcm_config->opp_id; /* Return the Highest OPP */
+ for (; prcm_config->rate; prcm_config--) {
+ if (prcm_config->rate < freq)
+ return (prcm_config+1)->opp_id;
+ else if (prcm_config->rate == freq)
+ return prcm_config->opp_id;
+ }
+ /* Return the least OPP */
+ return (prcm_config+1)->opp_id;
+}
+
+static void omap3_table_recalc(struct clk *clk)
+{
+ if ((clk != &virt_vdd1_prcm_set) && (clk != &virt_vdd2_prcm_set))
+ return;
+
+ if ((curr_vdd1_prcm_set) && (clk == &virt_vdd1_prcm_set))
+ clk->rate = curr_vdd1_prcm_set->rate;
+ else if ((curr_vdd2_prcm_set) && (clk == &virt_vdd2_prcm_set))
+ clk->rate = curr_vdd2_prcm_set->rate;
+ pr_debug("CLK RATE:%lu\n", clk->rate);
+}
+
+static long omap3_round_to_table_rate(struct clk *clk, unsigned long rate)
+{
+ struct omap_opp *ptr;
+ long highest_rate;
+
+ if ((clk != &virt_vdd1_prcm_set) && (clk != &virt_vdd2_prcm_set))
+ return -EINVAL;
+
+ highest_rate = -EINVAL;
+
+ if (clk == &virt_vdd1_prcm_set)
+ ptr = mpu_opps + MAX_VDD1_OPP;
+ else
+ ptr = dsp_opps + MAX_VDD2_OPP;
+
+ for (; ptr->rate; ptr--) {
+ highest_rate = ptr->rate;
+ pr_debug("Highest speed : %lu, rate: %lu\n", highest_rate,
+ rate);
+ if (ptr->rate <= rate)
+ break;
+ }
+ return highest_rate;
+}
+
+static int omap3_select_table_rate(struct clk *clk, unsigned long rate)
+{
+ struct omap_opp *prcm_vdd;
+ unsigned long found_speed = 0, curr_mpu_speed;
+ int index;
+
+ if ((clk != &virt_vdd1_prcm_set) && (clk != &virt_vdd2_prcm_set))
+ return -EINVAL;
+
+ if (clk == &virt_vdd1_prcm_set) {
+ prcm_vdd = mpu_opps + MAX_VDD1_OPP;
+ index = MAX_VDD1_OPP;
+ } else if (clk == &virt_vdd2_prcm_set) {
+ prcm_vdd = l3_opps + MAX_VDD2_OPP;
+ index = MAX_VDD2_OPP;
+ }
+
+ for (; prcm_vdd->rate; prcm_vdd--, index--) {
+ if (prcm_vdd->rate <= rate) {
+ found_speed = prcm_vdd->rate;
+ pr_debug("Found speed = %lu\n", found_speed);
+ break;
+ }
+ }
+
+ if (!found_speed) {
+ printk(KERN_INFO "Could not set table rate to %luMHz\n",
+ rate / 1000000);
+ return -EINVAL;
+ }
+
+
+ if (clk == &virt_vdd1_prcm_set) {
+ curr_mpu_speed = curr_vdd1_prcm_set->rate;
+ clk_set_rate(dpll1_clk, prcm_vdd->rate);
+ clk_set_rate(dpll2_clk, dsp_opps[index].rate);
+ curr_vdd1_prcm_set = prcm_vdd;
+#ifndef CONFIG_CPU_FREQ
+ /*Update loops_per_jiffy if processor speed is being changed*/
+ loops_per_jiffy = compute_lpj(loops_per_jiffy,
+ curr_mpu_speed/1000, found_speed/1000);
#endif
+ } else {
+ clk_set_rate(dpll3_clk, prcm_vdd->rate);
+ curr_vdd2_prcm_set = prcm_vdd;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_ARCH_OMAP3 */
Index: linux-omap-2.6/arch/arm/plat-omap/omap-pm-srf.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/plat-omap/omap-pm-srf.c 2008-11-10
15:24:55.000000000 +0530
+++ linux-omap-2.6/arch/arm/plat-omap/omap-pm-srf.c 2008-11-10
15:29:38.000000000 +0530
@@ -27,9 +27,9 @@
#include <mach/resource.h>
#include <mach/omapdev.h>
-static struct omap_opp *dsp_opps;
-static struct omap_opp *mpu_opps;
-static struct omap_opp *l3_opps;
+struct omap_opp *dsp_opps;
+struct omap_opp *mpu_opps;
+struct omap_opp *l3_opps;
#define LAT_RES_POSTAMBLE "_latency"
#define MAX_LATENCY_RES_NAME 30
@@ -340,19 +340,19 @@ void omap_pm_pwrdm_inactive(struct power
* Should be called before clk framework since clk fw will call
* omap_pm_pwrdm_{in,}active()
*/
-int __init omap_pm_if_early_init(void)
+int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
+ struct omap_opp *dsp_opp_table,
+ struct omap_opp *l3_opp_table)
{
+ mpu_opps = mpu_opp_table;
+ dsp_opps = dsp_opp_table;
+ l3_opps = l3_opp_table;
return 0;
}
/* Must be called after clock framework is initialized */
-int __init omap_pm_if_init(struct omap_opp *mpu_opp_table,
- struct omap_opp *dsp_opp_table,
- struct omap_opp *l3_opp_table)
+int __init omap_pm_if_init(void)
{
- mpu_opps = mpu_opp_table;
- dsp_opps = dsp_opp_table;
- l3_opps = l3_opp_table;
resource_init(resources_omap);
return 0;
}
Index: linux-omap-2.6/arch/arm/plat-omap/include/mach/omap-pm.h
===================================================================
--- linux-omap-2.6.orig/arch/arm/plat-omap/include/mach/omap-pm.h
2008-11-10 15:24:55.000000000 +0530
+++ linux-omap-2.6/arch/arm/plat-omap/include/mach/omap-pm.h 2008-11-10
15:29:38.000000000 +0530
@@ -33,6 +33,10 @@ struct omap_opp {
u16 min_vdd;
};
+extern struct omap_opp *mpu_opps;
+extern struct omap_opp *dsp_opps;
+extern struct omap_opp *l3_opps;
+
/*
* agent_id values for use with omap_pm_set_min_bus_tput():
*
@@ -46,25 +50,25 @@ struct omap_opp {
/**
* omap_pm_if_early_init - OMAP PM init code called before clock fw init
+ * @mpu_opp_table: array ptr to struct omap_opp for MPU
+ * @dsp_opp_table: array ptr to struct omap_opp for DSP
+ * @l3_opp_table : array ptr to struct omap_opp for CORE
*
* Initialize anything that must be configured before the clock
* framework starts. The "_if_" is to avoid name collisions with the
* PM idle-loop code.
*/
-int __init omap_pm_if_early_init(void);
+int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
+ struct omap_opp *dsp_opp_table,
+ struct omap_opp *l3_opp_table);
/**
* omap_pm_if_init - OMAP PM init code called after clock fw init
- * @mpu_opp_table: array ptr to struct omap_opp for MPU
- * @dsp_opp_table: array ptr to struct omap_opp for DSP
- * @l3_opp_table : array ptr to struct omap_opp for CORE
*
* The main initialization code. OPP tables are passed in here. The
* "_if_" is to avoid name collisions with the PM idle-loop code.
*/
-int __init omap_pm_if_init(struct omap_opp *mpu_opp_table,
- struct omap_opp *dsp_opp_table,
- struct omap_opp *l3_opp_table);
+int __init omap_pm_if_init(void);
/**
* omap_pm_if_exit - OMAP PM exit code
Index: linux-omap-2.6/arch/arm/mach-omap2/io.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/io.c 2008-11-10
15:26:46.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/io.c 2008-11-10 15:33:34.000000000
+0530
@@ -204,12 +204,13 @@ void __init omap2_init_common_hw(struct
struct omap_opp *l3_opps)
{
omap2_mux_init();
- omap_pm_if_early_init();
+ /* The OPP tables have to be registered before a clk init */
+ omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omapdev_init(omapdevs);
omap2_clk_init();
- omap_pm_if_init(mpu_opps, dsp_opps, l3_opps);
+ omap_pm_if_init();
omap2_sdrc_init(sp);
gpmc_init();
}
Index: linux-omap-2.6/arch/arm/plat-omap/omap-pm-noop.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/plat-omap/omap-pm-noop.c 2008-11-10
15:24:55.000000000 +0530
+++ linux-omap-2.6/arch/arm/plat-omap/omap-pm-noop.c 2008-11-10
15:29:38.000000000 +0530
@@ -26,9 +26,9 @@
#include <mach/powerdomain.h>
-static struct omap_opp *dsp_opps;
-static struct omap_opp *mpu_opps;
-static struct omap_opp *l3_opps;
+struct omap_opp *dsp_opps;
+struct omap_opp *mpu_opps;
+struct omap_opp *l3_opps;
/*
* Device-driver-originated constraints (via board-*.c files)
@@ -310,19 +310,19 @@ void omap_pm_pwrdm_inactive(struct power
* Should be called before clk framework since clk fw will call
* omap_pm_pwrdm_{in,}active()
*/
-int __init omap_pm_if_early_init(void)
+int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
+ struct omap_opp *dsp_opp_table,
+ struct omap_opp *l3_opp_table)
{
+ mpu_opps = mpu_opp_table;
+ dsp_opps = dsp_opp_table;
+ l3_opps = l3_opp_table;
return 0;
}
/* Must be called after clock framework is initialized */
-int __init omap_pm_if_init(struct omap_opp *mpu_opp_table,
- struct omap_opp *dsp_opp_table,
- struct omap_opp *l3_opp_table)
+int __init omap_pm_if_init(void)
{
- mpu_opps = mpu_opp_table;
- dsp_opps = dsp_opp_table;
- l3_opps = l3_opp_table;
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
