* Grazvydas Ignotas <[EMAIL PROTECTED]> [081106 11:50]:
> This patch adds ADS7846 compatible touchscreen support for
> OMAP3 Pandora.

Pushing these today.

Tony

> Signed-off-by: Grazvydas Ignotas <[EMAIL PROTECTED]>
> ---
>  arch/arm/mach-omap2/board-omap3pandora.c |   57 
> ++++++++++++++++++++++++++++++
>  1 files changed, 57 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-omap3pandora.c 
> b/arch/arm/mach-omap2/board-omap3pandora.c
> index 9fd3499..b10bf00 100644
> --- a/arch/arm/mach-omap2/board-omap3pandora.c
> +++ b/arch/arm/mach-omap2/board-omap3pandora.c
> @@ -25,6 +25,8 @@
>  #include <linux/kernel.h>
>  #include <linux/platform_device.h>
>  
> +#include <linux/spi/spi.h>
> +#include <linux/spi/ads7846.h>
>  #include <linux/i2c/twl4030.h>
>  
>  #include <linux/mtd/mtd.h>
> @@ -45,6 +47,7 @@
>  #include <mach/nand.h>
>  #include <mach/usb-ehci.h>
>  #include <mach/usb-musb.h>
> +#include <mach/mcspi.h>
>  
>  #include "sdram-micron-mt46h32m32lf-6.h"
>  #include "mmc-twl4030.h"
> @@ -54,6 +57,8 @@
>  #define GPMC_CS0_BASE  0x60
>  #define GPMC_CS_SIZE   0x30
>  
> +#define OMAP3_PANDORA_TS_GPIO                94
> +
>  static struct mtd_partition omap3pandora_nand_partitions[] = {
>       {
>               .name           = "xloader",
> @@ -185,6 +190,55 @@ static void __init omap3pandora_init_irq(void)
>       omap_gpio_init();
>  }
>  
> +static void __init omap3pandora_ads7846_init(void)
> +{
> +     int gpio = OMAP3_PANDORA_TS_GPIO;
> +     int ret;
> +
> +     ret = gpio_request(gpio, "ads7846_pen_down");
> +     if (ret < 0) {
> +             printk(KERN_ERR "Failed to request GPIO %d for "
> +                             "ads7846 pen down IRQ\n", gpio);
> +             return;
> +     }
> +
> +     gpio_direction_input(gpio);
> +}
> +
> +static int ads7846_get_pendown_state(void)
> +{
> +     return !gpio_get_value(OMAP3_PANDORA_TS_GPIO);
> +}
> +
> +static struct ads7846_platform_data ads7846_config = {
> +     .x_max                  = 0x0fff,
> +     .y_max                  = 0x0fff,
> +     .x_plate_ohms           = 180,
> +     .pressure_max           = 255,
> +     .debounce_max           = 10,
> +     .debounce_tol           = 3,
> +     .debounce_rep           = 1,
> +     .get_pendown_state      = ads7846_get_pendown_state,
> +     .keep_vref_on           = 1,
> +};
> +
> +static struct omap2_mcspi_device_config ads7846_mcspi_config = {
> +     .turbo_mode     = 0,
> +     .single_channel = 1,  /* 0: slave, 1: master */
> +};
> +
> +static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
> +     {
> +             .modalias               = "ads7846",
> +             .bus_num                = 1,
> +             .chip_select            = 0,
> +             .max_speed_hz           = 1500000,
> +             .controller_data        = &ads7846_mcspi_config,
> +             .irq                    = OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO),
> +             .platform_data          = &ads7846_config,
> +     }
> +};
> +
>  static struct platform_device omap3pandora_lcd_device = {
>       .name           = "pandora_lcd",
>       .id             = -1,
> @@ -219,10 +273,13 @@ static void __init omap3pandora_init(void)
>       omap_board_config = omap3pandora_config;
>       omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
>       omap_serial_init();
> +     spi_register_board_info(omap3pandora_spi_board_info,
> +                     ARRAY_SIZE(omap3pandora_spi_board_info));
>       hsmmc_init(mmc);
>       usb_musb_init();
>       usb_ehci_init();
>       omap3pandora_flash_init();
> +     omap3pandora_ads7846_init();
>  }
>  
>  static void __init omap3pandora_map_io(void)
> -- 
> 1.5.4.3
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to