* Paul Walmsley <[EMAIL PROTECTED]> [081014 10:47]: > Hello, > > This patch set programs the I2C controller OCP_SYSCONFIG register > after the driver resets the device. It is derived from the changes > mentioned by Richard Woodruff <[EMAIL PROTECTED]> at > > http://git.omapzoom.org/?p=omapkernel;a=blob;f=drivers/i2c/busses/i2c-omap.c;hb=d0b4bad4926f9a147a73498f7a62a0ae1cf6f83a > > however, the CLOCKACTIVITY change on clk_enable()/clk_disable() in that > code currently seems pointless, so it has been excluded until more > information is available from TI or until problems are encountered. > > This patchset should only change behavior on OMAP2x30 and OMAP3xxx devices. > > Boot-tested on 2430SDP and 3430SDP; compile-tested with the 5912OSK (OMAP1) > defconfig. Comments welcome,
Pushing both to l-o today, also adding to upstream i2c-omap queue. Tony > > > - Paul > > --- > > text data bss dec hex filename > 3472584 160600 105760 3738944 390d40 vmlinux.3430sdp.orig > 3472616 160600 105760 3738976 390d60 vmlinux.3430sdp > > drivers/i2c/busses/i2c-omap.c | 65 > ++++++++++++++++++++++++++++++++--------- > 1 files changed, 50 insertions(+), 15 deletions(-) > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
