We scope-verified these scl and sch values for 100 and 400 kHz busses.
Now they're in the specs.
On Wed, 2008-11-26 at 15:44 +0200, [EMAIL PROTECTED] wrote:
> From: Eero Nurkkala <[EMAIL PROTECTED]>
>
> The prescalers for 100 kHz and 400 kHz mode
> are wrong for omap 3430 and omap 2430. The
> internal clock is the fclock divided by the
> prescaler. The PSC is an 8 bit field in
> omap3430 and omap2430. Moreover, the scll and
> sclh values should be adjusted properly.
> Having the correct prescaler is important in
> the process of getting a finite i2c clock. In
> addition, the prescaler is used in the process
> of activating the correct noise filter and thus,
> lets more error resilient i2c communications.
>
> Signed-off-by: Eero Nurkkala <[EMAIL PROTECTED]>
> ---
> drivers/i2c/busses/i2c-omap.c | 12 +++++++++---
> 1 files changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index 630702c..c21af3f 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -337,7 +337,13 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
> if (cpu_is_omap2430() || cpu_is_omap34xx()) {
>
> /* HSI2C controller internal clk rate should be 19.2 Mhz */
> - internal_clk = 19200;
> + if (dev->speed > 400)
> + internal_clk = 19200;
> + else if (dev->speed > 100)
> + internal_clk = 9600;
> + else
> + internal_clk = 4000;
> +
> fclk_rate = clk_get_rate(dev->fclk) / 1000;
>
> /* Compute prescaler divisor */
> @@ -355,8 +361,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
> hssclh = fclk_rate / (dev->speed * 2) - 6;
> } else {
> /* To handle F/S modes */
> - fsscll = internal_clk / (dev->speed * 2) - 6;
> - fssclh = internal_clk / (dev->speed * 2) - 6;
> + fsscll = internal_clk / (dev->speed * 2) - 3;
> + fssclh = internal_clk / (dev->speed * 2) - 9;
> }
> scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
> sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
