On ma, 2008-12-01 at 12:50 +0200, Kalle Jokiniemi wrote:
> On ma, 2008-12-01 at 11:06 +0200, Högander Jouni wrote:
> > "ext Kalle Jokiniemi" <[EMAIL PROTECTED]> writes:
> > 
> > > This patch enables MStandby smart-idle mode, autoidle smartidle mode,
> > > and the autoidle bit for DMA4_OCP_SYSCONFIG.
> > >
> > > Signed-off-by: Kalle Jokiniemi <[EMAIL PROTECTED]>
> > > ---
> > >  arch/arm/plat-omap/dma.c              |   13 +++++++++++++
> > >  arch/arm/plat-omap/include/mach/dma.h |   15 +++++++++++++++
> > >  2 files changed, 28 insertions(+), 0 deletions(-)
> > >
> > > diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
> > > index c4e5ba3..9d8d28c 100644
> > > --- a/arch/arm/plat-omap/dma.c
> > > +++ b/arch/arm/plat-omap/dma.c
> > > @@ -2420,6 +2420,19 @@ static int __init omap_init_dma(void)
> > >   if (cpu_class_is_omap2())
> > >           setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
> > >  
> > > + /* Enable smartidle idlemodes and autoidle */
> > > + if (cpu_is_omap34xx()) {
> > 
> > I think this can be done for omap2 also.
> 
> Probably true. If no other comments come today, I'll post a new patch
> with this change.

Now that I re-checked, there is no SIDLEMODE for omap2. Also in omap2,
setting MIDLEMODE to smartidle cannot be done if cam DMA is used.

So, I think the patch should be as it is, omap3 only.

- Kalle

> 
> - Kalle
> 
> > 
> > > +         u32 v = dma_read(OCP_SYSCONFIG);
> > > +         v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
> > > +                         DMA_SYSCONFIG_SIDLEMODE_MASK |
> > > +                         DMA_SYSCONFIG_AUTOIDLE);
> > > +         v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
> > > +                 DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
> > > +                 DMA_SYSCONFIG_AUTOIDLE);
> > > +         dma_write(v , OCP_SYSCONFIG);
> > > + }
> > > +
> > > +
> > >   /* FIXME: Update LCD DMA to work on 24xx */
> > >   if (cpu_class_is_omap1()) {
> > >           r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
> > > diff --git a/arch/arm/plat-omap/include/mach/dma.h
> > >   b/arch/arm/plat-omap/include/mach/dma.h
> > 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to